<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
<title></title>
</head>
<body bgcolor="#ffffff" text="#000000">
There is no way in the current version of eQUEST to view more than 13
runs in the Parametric Run Comparison reports. That leaves you with 2
options (that come to mind):<br>
<br>
(1) If you can narrow the list of EEM runs you would like to review
via the parametric report, then you can do so by deleting (and possibly
re-organizing/consolidating) your list of EEM runs. If the data
(changes) associated with any of the deleted runs are needed to be
utilized in subsequent runs but the subsequent EEM run topic does not
correspond with that of the deleted run(s), then you can incorporate
those changes by re-creating the subsequent run with a Measure Category
of Whole Site/Building. Unfortunately, you cannot convert the measure
category of existing EEM runs, so in order to retain the desired
measure order, you may have to delete all those EEM runs including and
following the first that you wish to re-create as a Whole Site/Building
run. When editing Whole Site/Building EEM runs, you essentially
re-enter the wizard and can edit whatever data you wish to define that
run, which allows you to modify data of several different measure
categories all within a single EEM run.<br>
<br>
(2) If you need to see a report with more than 13 runs, then you can
access the individual run results and produce a report outside eQUEST,
typically in a spreadsheet program, via a CSV (comma separated values
text format) file that gets written as the runs are simulated. The
file is located in the project directory and named "<project
filename> - Parms.csv" and includes a pretty wide variety energy use
and coincident & non-coincident electric demands by enduse, along
with misc other pertinent results. There is also a "<project
filename> - Parms Mtr.csv" file that includes annual energy use and
demand by meter, should you want to see these numbers split out by
meter.<br>
These CSV files can be pulled into just about any spreadsheet program
or even a good number of databases and you can construct your own
report(s) from there.<br>
<br>
- Scott<br>
<br>
<br>
vpassaro wrote:
<blockquote cite="mid:872A062CAA864AE0AFFB47537C87CB2C@vpgateway8711"
type="cite">
<meta http-equiv="Content-Type" content="text/html; ">
<meta name="Generator" content="Microsoft Word 10 (filtered)">
<style>
<!--
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0in;
margin-bottom:.0001pt;
font-size:12.0pt;
font-family:"Times New Roman";}
a:link, span.MsoHyperlink
{color:blue;
text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
{color:purple;
text-decoration:underline;}
span.EmailStyle17
{font-family:Arial;
color:windowtext;}
@page Section1
{size:8.5in 11.0in;
margin:1.0in 1.25in 1.0in 1.25in;}
div.Section1
{page:Section1;}
-->
</style>
<div class="Section1">
<p class="MsoNormal"><font face="Arial" size="2"><span
style="font-size: 10pt; font-family: Arial;">Hello All,</span></font></p>
<p class="MsoNormal"><font face="Arial" size="2"><span
style="font-size: 10pt; font-family: Arial;"> I
had 5 different multi-family buildings in 1 model so I created 5
building
shells. I created 18 measures under the energy efficiency measure
wizard.
After simulation under the annual building summary tab I only can see
13 of the
measures however when the model was calculation it appears all 18 were
calculated.
Does anyone know how I can see the results for the missing measures? </span></font></p>
<p class="MsoNormal"><font face="Arial" size="2"><span
style="font-size: 10pt; font-family: Arial;"> </span></font></p>
<p class="MsoNormal"><font face="Arial" size="2"><span
style="font-size: 10pt; font-family: Arial;"> Thank
You, </span></font></p>
<p class="MsoNormal"><font face="Arial" size="2"><span
style="font-size: 10pt; font-family: Arial;"> </span></font></p>
<p class="MsoNormal"><font face="Arial" size="2"><span
style="font-size: 10pt; font-family: Arial;">Vincent Passaro</span></font></p>
<p class="MsoNormal"><font face="Arial" size="2"><span
style="font-size: 10pt; font-family: Arial;">The Daylight Savings
Company</span></font></p>
<p class="MsoNormal"><font face="Arial" size="2"><span
style="font-size: 10pt; font-family: Arial;">25 Main Street</span></font></p>
<p class="MsoNormal"><font face="Arial" size="2"><span
style="font-size: 10pt; font-family: Arial;">Goshen</span></font><font
face="Arial" size="2"><span
style="font-size: 10pt; font-family: Arial;">, </span></font><font
face="Arial" size="2"><span
style="font-size: 10pt; font-family: Arial;">NY</span></font><font
face="Arial" size="2"><span
style="font-size: 10pt; font-family: Arial;"> </span></font><font
face="Arial" size="2"><span
style="font-size: 10pt; font-family: Arial;">10924</span></font></p>
<p class="MsoNormal"><font face="Arial" size="2"><span
style="font-size: 10pt; font-family: Arial;">phone: 845-291-1275, ext
7#</span></font></p>
<p class="MsoNormal"><font face="Arial" size="2"><span
style="font-size: 10pt; font-family: Arial;">fax: 845-291-1276</span></font></p>
<p class="MsoNormal"><font face="Arial" size="2"><span
style="font-size: 10pt; font-family: Arial;"><a moz-do-not-send="true"
href="http://www.daylightsavings.us">www.daylightsavings.us</a></span></font></p>
<p class="MsoNormal"><font face="Times New Roman" size="3"><span
style="font-size: 12pt;"> </span></font></p>
<p class="MsoNormal"><font face="Times New Roman" size="3"><span
style="font-size: 12pt;"> </span></font></p>
</div>
<pre wrap="">
<hr size="4" width="90%">
_______________________________________________
Equest-users mailing list
<a class="moz-txt-link-freetext" href="http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org">http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org</a>
To unsubscribe from this mailing list send a blank message to <a class="moz-txt-link-abbreviated" href="mailto:EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG">EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG</a>
</pre>
</blockquote>
</body>
</html>