<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=us-ascii">
<META content="MSHTML 6.00.2900.5803" name=GENERATOR></HEAD>
<BODY>
<DIV><FONT face=Arial size=2><SPAN
class=386115612-16072009>Hello,</SPAN></FONT></DIV>
<DIV><FONT face=Arial size=2><SPAN
class=386115612-16072009></SPAN></FONT> </DIV>
<DIV><FONT face=Arial size=2><SPAN class=386115612-16072009> I
am an eQuest user making my first detailed building model. The model has
two floors; no floor multipliers are used. Using the detailed interface, I
created several windows in most of the external walls on each floor. These
windows appeared in the component tree and in the 2-D Geometry tab. After
closing then re-opening the project, these windows appeared only in the
component tree (not in the 2-D Geometry tab), except for the windows on the
first wall in which I installed them (the ground floor west wall), which appear
in both the component tree and in the 2-D Geometry tab. In case it
matters, all windows thusfar created are linked to the first window that I
created, which is among those few that still appear. What is causing the
windows to disappear and how can I get them to re-appear?</SPAN></FONT></DIV>
<DIV><FONT face=Arial size=2><SPAN class=386115612-16072009>
By the way, this is the first of a few e-mail questions that I am considering
sending. I wish that I could give as much as I anticipate receiving in
answers, but I am quite new at eQuest. Thank you in advance for your
assistance.</SPAN></FONT></DIV>
<DIV><FONT face=Arial size=2><SPAN
class=386115612-16072009></SPAN></FONT> </DIV>
<DIV><FONT face=Arial size=2><SPAN class=386115612-16072009>Lars Fetzek,
EI</SPAN></FONT></DIV>
<DIV><FONT face=Arial size=2><SPAN class=386115612-16072009>Phoenix Engineering
Group, Inc.</SPAN></FONT></DIV>
<DIV><FONT face=Arial size=2><SPAN class=386115612-16072009>Tampa,
Florida</SPAN></FONT></DIV></BODY></HTML>