<div>Hello everyone, I'm a new eQuest user and working on my first LEED project. Fortunately and unfortunately, I am in charge of the energy modeling for the project. We are a two-man company and don't have many resources or other coworkers to turn to and figure things out collectively. Any help anyone can provide would be of much help. I've structured the questions to be specific and included background info and how I've implemented or believe I should implement input into eQuest. Other difficulties will be addressed in subsequent emails with similar structured questions. For your help I thank you in advance.</div>

<div> </div>
<div>Ashrae 90.1-2004 requires specific insulation values for the envelope: exterior walls steel-framed walls, roof with above deck insulation and <span class="yshortcuts" id="lw_1246476468_5" style="CURSOR: hand; BORDER-BOTTOM: #0066cc 1px dashed">steel joist</span> floors. <br>
-Exterior walls eQuest offers many <span class="yshortcuts" id="lw_1246476468_6">steel frame options</span>. Does it matter which one is selected? I selected Metal Frame 2x4, 16 in. O.C. Project is in a Zone 5b and exterior wall insulation requires Assembly Maximum of U-0.084 and Insulation Min. R-Value of R-13.0 + R-3.8 ci" I figured it was easier to model by going with the maximum assembly with a U value of 0.084 and eQuest allows exterior wall layer by layer customization where you can specify final u value however no layer there has the <span class="yshortcuts" id="lw_1246476468_7" style="BACKGROUND: none transparent scroll repeat 0% 0%; CURSOR: hand; BORDER-BOTTOM: medium none">steel frame selection</span>. What do you do? If I discard layer-by-layer and go with min insulation and selecting the same Metal Frame 2x4 and try to select the required insulation values, many R-values are not available or unknown if will be treated continuous or not. How do you comply with the wall type and insulation requirements? My guess is that it's best to select the construction required, i.e. for walls Metal Frame 2x4 and then edit the calculated U-value of eWall<br>
under constructions in the detailed mode and set the user default to the 0.084 however it defaults back and remains green color. How do you override it? Should I add a custom insulation layer and set the R-value to whatever it needs to be for final calcualted u-value to be the 0.084 I was seeking? What's the right approach to meet compliance? These issues exist for the <span class="yshortcuts" id="lw_1246476468_8" style="CURSOR: hand; BORDER-BOTTOM: #0066cc 1px dashed">roof construction</span> as well.<br>
-How is a roof with insulation entirely above deck specified? I've selected Metal Frame 24 in o.c. and specified the exterior insulation as I assume this is considered as above deck insulation.<br>Also roof reflectivity must be 0.3 for baseline and 0.55 for proposed building. This cannot be specified thru the wizard since none of the available roof colors have exact required values. I believe it's entered in the detailed mode, under roof contruction, in the Ext. Color (absorp.) text box by overriding the value. Is this correct?<br>
-Steel joist floors. I don't see where this selection can be made. Layer-by-layer does not have steel joist selection either. </div>
<div> </div>
<div>Thanks again everyone,</div>
<div>Vince<br> </div>