<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
Both are possible - depending on the definition of each parametric run.<br>
If each run is setup to be based on the baseline run, then running only
the last one would not take into account the previous param run
settings. If however each parametric run is set to be based on the
previous parametric run, then the final parametric run would indeed
include the settings from all the parametric runs.<br>
<br>
Re: the original question about combining the param runs into a single
run -<br>
This is not something that eQUEST can do in any automated way. You
could however try manual edits to the .PRD fiel for the project. I
BELIEVE that if you remove (cut) PARAMETRIC_COMPONENTs from one
PARAMETRIC_RUN and paste them under another run and then open the
project in eQUEST you should find that the runs are re-organized
accordingly. This is NOT something we recommend that users try unless
they are competent text/code file editors - and we strongly recommend
that you first do a "Save As..." and try this out on a copy of your
project files.<br>
<br>
- Scott<br>
<br>
<br>
Vikram Sami wrote:
<blockquote
cite="mid:55BA83825A482144A8637F9CAA981F761397A04D@las-mail.lordaecksargent.internal"
type="cite">
<pre wrap="">Actually when you run parametrics cumulatively I believe they do take the properties of the previous run into account. So for example if run#6 makes your glass darker and run#7 adds daylight sensors, run#7 will assume the darker glass.
Vikram Sami, LEED AP
Direct Phone 404-253-1466 | Direct Fax 404-253-1366
LORD, AECK & SARGENT ARCHITECTURE
1201 Peachtree Street NE, Suite 300, Atlanta, GA 30361
Responsive Design • Technological Expertise • Exceptional Service
Please visit our new website | <a class="moz-txt-link-abbreviated" href="http://www.lordaecksargent.com">www.lordaecksargent.com</a>
Think GREEN before you print.
-----Original Message-----
From: John Aulbach [<a class="moz-txt-link-freetext" href="mailto:jra_sac@yahoo.com">mailto:jra_sac@yahoo.com</a>]
Sent: Monday, June 01, 2009 5:21 PM
To: Jeremy McClanathan; <a class="moz-txt-link-abbreviated" href="mailto:equest-users@lists.onebuilding.org">equest-users@lists.onebuilding.org</a>; Vikram Sami
Subject: Re: [Equest-users] Combining Parametric Components
Jeremy, What Vikram says is correct. However, I believe you STILL need to add all of the Parametric components into one run to compare to the Base. Run #7 will compare to Run #6, but Run #7 won't have Run #6 parameters in it, as well as its own.
In other words, the parameters will not accumulate as the run numbers get bigger. I believe you still need a cumulative run will all envelope parameters added into that run.
John Aulbach
--- On Mon, 6/1/09, Vikram Sami <a class="moz-txt-link-rfc2396E" href="mailto:VSami@lasarchitect.com"><VSami@lasarchitect.com></a> wrote:
</pre>
<blockquote type="cite">
<pre wrap="">From: Vikram Sami <a class="moz-txt-link-rfc2396E" href="mailto:VSami@lasarchitect.com"><VSami@lasarchitect.com></a>
Subject: Re: [Equest-users] Combining Parametric Components
To: "Jeremy McClanathan" <a class="moz-txt-link-rfc2396E" href="mailto:jmcclanathan@CDiengineers.com"><jmcclanathan@CDiengineers.com></a>, <a class="moz-txt-link-abbreviated" href="mailto:equest-users@lists.onebuilding.org">equest-users@lists.onebuilding.org</a>
Date: Monday, June 1, 2009, 2:09 PM
You can
run the parametric runs
incrementally or cumulatively. To run them
cumulatively, in the parametric
run dialogue, you need to base the run on the previous run
(you can base the un
on any parametric run preceding it).
Vikram
Sami, LEED AP
Direct
Phone 404-253-1466 | Direct Fax 404-253-1366
LORD, AECK & SARGENT ARCHITECTURE
1201 Peachtree Street NE, Suite 300,
Atlanta, GA 30361
Responsive
Design · Technological Expertise · Exceptional
Service
Please
visit our new website | <a class="moz-txt-link-abbreviated" href="http://www.lordaecksargent.com">www.lordaecksargent.com</a>
P
Think
GREEN before you print.
From: <a class="moz-txt-link-abbreviated" href="mailto:equest-users-bounces@lists.onebuilding.org">equest-users-bounces@lists.onebuilding.org</a>
[<a class="moz-txt-link-freetext" href="mailto:equest-users-bounces@lists.onebuilding.org">mailto:equest-users-bounces@lists.onebuilding.org</a>] On
Behalf Of Jeremy
McClanathan
Sent: Monday, June 01, 2009 4:57 PM
To: <a class="moz-txt-link-abbreviated" href="mailto:equest-users@lists.onebuilding.org">equest-users@lists.onebuilding.org</a>
Subject: [Equest-users] Combining Parametric
Components
Hello,
Does anyone out there know whether or
not it is possible to
take parametric components that are currently each being
used for individual
parametric runs and combine all of them under 1 parametric
run?
Currently, I have a model where I have
analyzed 13 envelope
measures using parametric runs. Now, I would like
combine all of them
into 1 run called envelope measures. Is this
possible?
Jeremy
This email message, including
any attachments, is for the sole use of the intended
recipient and may contain
confidential, proprietary, and/or privileged information,
as well as content
subject to copyright and other intellectual laws. If
you are not the
intended recipient, you may not disclose, use, copy, or
distribute the email
message or its attachments. If you believe you have
received this email
message in error, please contact the sender by reply email,
immediately delete
this email and destroy copies.
-----Inline Attachment Follows-----
_______________________________________________
Equest-users mailing list
<a class="moz-txt-link-freetext" href="http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org">http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org</a>
To unsubscribe from this mailing list send a blank
message to <a class="moz-txt-link-abbreviated" href="mailto:EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG">EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG</a>
</pre>
</blockquote>
<pre wrap=""><!---->
_______________________________________________
Equest-users mailing list
<a class="moz-txt-link-freetext" href="http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org">http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org</a>
To unsubscribe from this mailing list send a blank message to <a class="moz-txt-link-abbreviated" href="mailto:EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG">EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG</a>
</pre>
</blockquote>
</body>
</html>