<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content="text/html; charset=us-ascii" http-equiv=Content-Type>
<META name=GENERATOR content="MSHTML 8.00.6001.18702"></HEAD>
<BODY>
<DIV><FONT size=2 face=Arial><SPAN class=900085217-27052009>Hello
all,</SPAN></FONT></DIV>
<DIV><FONT size=2 face=Arial><SPAN
class=900085217-27052009></SPAN></FONT> </DIV>
<DIV><FONT size=2 face=Arial><SPAN class=900085217-27052009>Working on a 4-story
building that has 2 VAV air handling units with 53 deg F well water for the
cooling coil and 200 deg F hot water (from boiler) for the heating coil. The
AHU's then provide air to the various VAV boxes. The problem is that 1/4 of them
have hot water reheat. I am using VAVS for the AHU HVAC system type, but the
only option for reheat or no reheat is located there in the Air-Side
HVAC System properties. Therefore, it puts reheat on all VAV boxes. I have
looked through the Air-Side HVAC Zone properties, but there does not seem to be
any way to select which zones/VAV boxes have reheat and which do not. Any help
would be much appreciated.</SPAN></FONT></DIV>
<DIV><FONT size=2 face=Arial><SPAN
class=900085217-27052009></SPAN></FONT> </DIV>
<DIV><FONT size=2 face=Arial><SPAN
class=900085217-27052009>Regards,</SPAN></FONT></DIV>
<DIV> </DIV>
<DIV align=left>
<DIV align=left><FONT size=2 face=Arial>A. Tuan Le, E.I.T.</FONT></DIV>
<DIV align=left><FONT size=2 face=Arial>Design Engineer</FONT></DIV>
<DIV align=left><FONT size=2 face=Arial><STRONG>McClure Engineering,
Inc</STRONG>.</FONT></DIV>
<DIV align=left><FONT size=2 face=Arial></FONT> </DIV>
<DIV align=left><FONT color=#0000ff size=2><EM>"Each problem that I solved
became a rule which served afterwards to solve other problems." - Rene
Descartes</EM></FONT><FONT color=#000000> </FONT></DIV></DIV>
<DIV> </DIV></BODY></HTML>