<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
eQUEST generates the DOE reports and puts them in the .sim text file,
including the LS-C report. The "View Detailed Simulation Output" will
open the .sim file with D2Simviewer -- a text editor which comes with
eQUEST which can jump to specific reports by report title and can parse
out the hourly reports (at least in 3.62 and beyond).<br>
<br>
In the non-hourly reports section of the component tree, in the Project
tab, you can specify which DOE reports you wish to be included.<br>
<br>
Hope this helps.<br>
<br>
Pallavi Mantha wrote:
<blockquote
cite="mid:9D041E1A31761D48887126EADA8318CD67E0B104A1@CCRD001.mail.lan"
type="cite">
<meta http-equiv="Content-Type" content="text/html; ">
<meta name="Generator" content="Microsoft Word 12 (filtered medium)">
<style>
<!--
/* Font Definitions */
@font-face
{font-family:Calibri;
panose-1:2 15 5 2 2 2 4 3 2 4;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0in;
margin-bottom:.0001pt;
font-size:11.0pt;
font-family:"Calibri","sans-serif";}
a:link, span.MsoHyperlink
{mso-style-priority:99;
color:blue;
text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
{mso-style-priority:99;
color:purple;
text-decoration:underline;}
span.EmailStyle17
{mso-style-type:personal-compose;
font-family:"Calibri","sans-serif";
color:windowtext;}
.MsoChpDefault
{mso-style-type:export-only;}
@page Section1
{size:8.5in 11.0in;
margin:1.0in 1.0in 1.0in 1.0in;}
div.Section1
{page:Section1;}
-->
</style>
<!--[if gte mso 9]><xml>
<o:shapedefaults v:ext="edit" spidmax="1026" />
</xml><![endif]--><!--[if gte mso 9]><xml>
<o:shapelayout v:ext="edit">
<o:idmap v:ext="edit" data="1" />
</o:shapelayout></xml><![endif]-->
<div class="Section1">
<p class="MsoNormal">All,<o:p></o:p></p>
<p class="MsoNormal">Can anybody shed some light on how I can
generate the
Building Peak Load Components report in eQuest? Is there a way to
specify which
reports you’d like to see at the end of the simulation? I know this
report can be generated using DOE 2.2 but I figured since eQuest is
based on
DOE engine.. I might be able to generate the same report in eQuest as
well. <o:p></o:p></p>
<p class="MsoNormal"><o:p> </o:p></p>
<p class="MsoNormal">Any input is highly appreciated,<o:p></o:p></p>
<p class="MsoNormal">Thanks,<o:p></o:p></p>
<p class="MsoNormal">Pallavi<o:p></o:p></p>
<p class="MsoNormal"><o:p> </o:p></p>
</div>
<pre wrap="">
<hr size="4" width="90%">
_______________________________________________
Equest-users mailing list
<a class="moz-txt-link-freetext" href="http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org">http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org</a>
To unsubscribe from this mailing list send a blank message to <a class="moz-txt-link-abbreviated" href="mailto:EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG">EQUEST-USERS-UNSUBSCRIBE@ONEBUILDING.ORG</a>
</pre>
<pre wrap="">
<hr size="4" width="90%">
No virus found in this incoming message.
Checked by AVG.
Version: 7.5.552 / Virus Database: 270.9.17/1845 - Release Date: 12/12/2008 9:02 AM
</pre>
</blockquote>
<br>
</body>
</html>