<div dir="ltr">Dear all,<br><br>Along with other spaces, I am about to model a service truck garage space used for about half hour in the morning to take the trucks out and half hour in the evening to get the trucks back in. The garage doors will be open in the summer for most of the day and will be closed as much as possible during the winter.<br>
<br>The HVAC system currently being considered is a water to water ground source heat pump that will be used in a heating mode only. The hot water loop will be used for point of use radiant heating while a dedicated outdoor air system is used for ventilation. The ventilation rates are maintained at a minimum level when not being controlled by carbon monoxide sensors. There is no cooling in the space.<br>
<br>What is the best way to set up the system in eQUEST from the beginning in the DD wizard mode?<br><br>Thanks,<br><br>RAMANA KOTI  Assoc. ASHRAE LEED® AP <br>Sustainable Building Analyst<br><br>ELEMENTS division of BNIM architects<br>
106 West 14th Street Suite 200<br>Kansas City Missouri 64105<br><br>d 816.783.1635 f 816.783.1501<br><a href="http://bnim.com">bnim.com</a> | <a href="http://elements.bnim.com">elements.bnim.com</a> <br><br>
</div>