Proj   "ventiladum_g"  
   ProgramVersion = "eQUEST 3.61.5653"
   BDBaseVersion = 20
   ProductCode = "eQUEST"
   WeatherFile = "TMY2\madrid.bin"
   CreateDate = 1220898807
   ModDate = 1221230494
   RunDate = 1221230483
   LibraryFile = "eQ_Lib.dat"
   ActiveMode = 0
   InputModule = 4
   InterfaceMode = 1
   AllowWizard = 1
   NotProjFile = "ventiladum_g"
   InputUnitsType = "English"
   OutputUnitsType = "English"
   PreviousName = "ventiladum_f"
   DetailedModelEdits = 1
   ProjTreeType[2] = 1
   ProjTreeType[4] = 1
   ProjTreeType[5] = 1
   ProjTreeID[2] = 10080000
   ProjTreeID[4] = 10670000
   ProjTreeID[5] = 10550000
   ProjTreeLabel[2] = "Dummy Space"
   ProjTreeLabel[4] = "Domestic Water Heater"
   ProjTreeLabel[5] = "Dummy zone"
   ..

MainWiz   "ventiladum_g"  
   ProductCode = "eQUEST"
   WizardType = "Design Development"
   DebugID = 0
   AllowCustWinDoor = 1
   ScreenIDArrIdx = 6
   ScreenIDArrID = 250
   Coverage = "User Selected"
   WeatherFile = "TMY2\madrid.bin"
   BldgType = "Multifamily, Low-Rise (exterior entries)"
   ..

ShellWiz   "Bldg Envelope & Loads 1"  
   ModelEnduse[1] = 0
   ModelEnduse[2] = 0
   ModelEnduse[4] = 0
   ModelEnduse[6] = 0
   ModelEnduse[7] = 0
   ModelEnduse[12] = 0
   ScreenIDArrIdx = 14
   ScreenIDArrID = 77
   BldgType = "Multifamily, Low-Rise (exterior entries)"
   FlrsAboveGrade = 1
   ShellPos_Specify = 1
   BldgX = 300
   FlrToCeiling = 9
   ZoningPattern = "- custom -"
   NumMCZnGrps = 0
   DiagLink = "Bldg Envelope & Loads 1 Diag Data"
   RoofConsType = "No Exterior Exposure (adiabatic)"
   VertExtBrdInsType = "3 in. polyisocyanurate (R-21)"
   VertExtSecInsType = "R-21 batt"
   VertExtIntInsType = "1 in. polyisocyanurate (R-7)"
   GrndFlrExposure = "Over Conditioned Space (adiabatic)"
   PerimInfMethod = "ACH (air changes per hour)"
   CoreInfMethod = "ACH (air changes per hour)"
   PerimInfil = 0
   CoreInfil = 0
   ZoningCurrent = 1
   AdiabaticCurrent = 1
   ZoneGroupsOK = 1
   DfltZnGrpName = ( "EL1 Underground Areas", "EL1 Ground Floor Core", 
                     "EL1 Ground Floor Perimeter", 
                     "EL1 Typical Floor(s) Core", 
                     "EL1 Typical Floor(s) Perimeter", 
                     "EL1 Top Floor Core", "EL1 Top Floor Perimeter" )
   CustomZoning = 1
   LastFootprint = 1
   PercentGlass1[1] = 0
   PercentGlass2[1] = 0
   PercentGlass3[1] = 0
   PercentGlass4[1] = 0
   NumExtDoors1[1] = 0
   NumExtDoors2[1] = 0
   NumExtDoors3[1] = 0
   NumExtDoors4[1] = 0
   SkyZonesCurrent = 1
   SkyltZones[1] = 1
   SkyltZones[2] = 1
   SkyltZones[3] = 1
   SkyltZones[4] = 1
   SkyltZones[5] = 1
   SkyPosCurrent = 1
   DayZonesCurrent[3] = 1
   DayltZones[1] = 1
   DayltZones[2] = 1
   DayltZones[3] = 1
   DayltZones[4] = 1
   DayltZones[5] = 0
   DayltZones[401] = 1
   DayltZones[402] = 1
   DayltZones[403] = 1
   DayltZones[404] = 1
   DayltZones[405] = 0
   WinDoorCurrent = 1
   DetailsCurrent = ( 1, 1, 1 )
   BDLNumDayltCtrls[1] = 0
   BDLNumDayltCtrls[2] = 0
   BDLNumDayltCtrls[3] = 0
   BDLNumDayltCtrls[4] = 0
   BDLNumDayltCtrls[5] = 0
   BDLNumDayltCtrls[401] = 0
   BDLNumDayltCtrls[402] = 0
   BDLNumDayltCtrls[403] = 0
   BDLNumDayltCtrls[404] = 0
   BDLNumDayltCtrls[405] = 0
   LndryLdsPUnitPWk = 0
   OccShape[1] = "EL1 Occup Profile (S1)"
   ILShape[1] = "EL1 InsLtg Profile (S1)"
   ELDayShapes = ( "EL1 ExtLtg DayShape (Jan)", 
                   "EL1 ExtLtg DayShape (Feb)", 
                   "EL1 ExtLtg DayShape (Mar)", 
                   "EL1 ExtLtg DayShape (Apr)", 
                   "EL1 ExtLtg DayShape (May)", 
                   "EL1 ExtLtg DayShape (Jun)", 
                   "EL1 ExtLtg DayShape (Jul)", 
                   "EL1 ExtLtg DayShape (Aug)", 
                   "EL1 ExtLtg DayShape (Sep)", 
                   "EL1 ExtLtg DayShape (Oct)", 
                   "EL1 ExtLtg DayShape (Nov)", 
                   "EL1 ExtLtg DayShape (Dec)" )
   OEShape[1] = "EL1 OffEq Profile (S1)"
   CEShape[1] = "EL1 CookEq Profile (S1)"
   MiscShape[1] = "EL1 Misc Profile (S1)"
   DHWShape[1] = "EL1 DHW Profile (S1)"
   SCRShape[1] = "EL1 S-C Refrig Profile (S1)"
   DaylitAreaCurrent[3] = 1
   RoofZoneErrorCode = 4
   ..

ShapeWiz   "EL1 InsLtg Profile (S1)"  
   ..

DayShape   "EL1 ExtLtg DayShape (Jan)"  
   ..

DayShape   "EL1 ExtLtg DayShape (Feb)"  
   ..

DayShape   "EL1 ExtLtg DayShape (Mar)"  
   ..

DayShape   "EL1 ExtLtg DayShape (Apr)"  
   ..

DayShape   "EL1 ExtLtg DayShape (May)"  
   ..

DayShape   "EL1 ExtLtg DayShape (Jun)"  
   ..

DayShape   "EL1 ExtLtg DayShape (Jul)"  
   ..

DayShape   "EL1 ExtLtg DayShape (Aug)"  
   ..

DayShape   "EL1 ExtLtg DayShape (Sep)"  
   ..

DayShape   "EL1 ExtLtg DayShape (Oct)"  
   ..

DayShape   "EL1 ExtLtg DayShape (Nov)"  
   ..

DayShape   "EL1 ExtLtg DayShape (Dec)"  
   ..

ShapeWiz   "EL1 OffEq Profile (S1)"  
   ..

ShapeWiz   "EL1 Misc Profile (S1)"  
   ..

ShapeWiz   "EL1 DHW Profile (S1)"  
   ..

ShapeWiz   "EL1 Occup Profile (S1)"  
   ..

ShapeWiz   "EL1 CookEq Profile (S1)"  
   ..

ShapeWiz   "EL1 S-C Refrig Profile (S1)"  
   ..

ZnGrpWiz   "EL1 Ground Floor Core"  
   ShortName = "GndCor"
   ..

ZnGrpWiz   "EL1 Ground Floor Perimeter"  
   ShortName = "GndPrm"
   HaveExhaustFans = 1
   ..

CustomZone   "Custom Zone 1"  
   NumVerts = 4
   X[1] = 0
   X[2] = 282.85
   X[3] = 282.85
   X[4] = 0
   Y[1] = 0
   Y[2] = 0
   Y[3] = 70.7
   Y[4] = 70.7
   ..

ShellWiz   "Bldg Envelope & Loads 2"  
   ScreenIDArrIdx = 1
   ScreenIDArrID = 22
   GrossArea = 19997
   FlrsAboveGrade = 1
   ShellPos_Dir = "West"
   ShellPos_Dist = 0
   ShellPos_Specify = 1
   BldgX = 0
   BldgY = 0
   FlrToCeiling = 9
   ZoningPattern = "- custom -"
   NumMCZnGrps = 0
   DiagLink = "Bldg Envelope & Loads 2 Diag Data"
   PerimInfMethod = "ACH (air changes per hour)"
   CoreInfMethod = "ACH (air changes per hour)"
   ZoningCurrent = 1
   AdiabaticCurrent = 1
   ZoneGroupsOK = 1
   DfltZnGrpName = ( "EL2 Underground Areas", "EL2 Ground Floor Core", 
                     "EL2 Ground Floor Perimeter", 
                     "EL2 Typical Floor(s) Core", 
                     "EL2 Typical Floor(s) Perimeter", 
                     "EL2 Top Floor Core", "EL2 Top Floor Perimeter" )
   CustomZoning = 1
   LastFootprint = 1
   SkyZonesCurrent = 1
   SkyltZones[1] = 1
   SkyltZones[2] = 1
   SkyltZones[3] = 1
   SkyltZones[4] = 1
   SkyltZones[5] = 1
   SkyPosCurrent = 1
   DayZonesCurrent[3] = 1
   DayltZones[1] = 1
   DayltZones[2] = 1
   DayltZones[3] = 1
   DayltZones[4] = 1
   DayltZones[5] = 0
   DayltZones[401] = 1
   DayltZones[402] = 1
   DayltZones[403] = 1
   DayltZones[404] = 1
   DayltZones[405] = 0
   WinDoorCurrent = 1
   DetailsCurrent = ( 1, 1, 1 )
   BDLNumDayltCtrls[1] = 0
   BDLNumDayltCtrls[2] = 0
   BDLNumDayltCtrls[3] = 0
   BDLNumDayltCtrls[4] = 0
   BDLNumDayltCtrls[5] = 0
   BDLNumDayltCtrls[401] = 0
   BDLNumDayltCtrls[402] = 0
   BDLNumDayltCtrls[403] = 0
   BDLNumDayltCtrls[404] = 0
   BDLNumDayltCtrls[405] = 0
   OccShape[1] = "EL2 Occup Profile (S1)"
   ILShape[1] = "EL2 InsLtg Profile (S1)"
   ELDayShapes = ( "EL2 ExtLtg DayShape (Jan)", 
                   "EL2 ExtLtg DayShape (Feb)", 
                   "EL2 ExtLtg DayShape (Mar)", 
                   "EL2 ExtLtg DayShape (Apr)", 
                   "EL2 ExtLtg DayShape (May)", 
                   "EL2 ExtLtg DayShape (Jun)", 
                   "EL2 ExtLtg DayShape (Jul)", 
                   "EL2 ExtLtg DayShape (Aug)", 
                   "EL2 ExtLtg DayShape (Sep)", 
                   "EL2 ExtLtg DayShape (Oct)", 
                   "EL2 ExtLtg DayShape (Nov)", 
                   "EL2 ExtLtg DayShape (Dec)" )
   CEShape[1] = "EL2 CookEq Profile (S1)"
   MiscShape[1] = "EL2 Misc Profile (S1)"
   DHWShape[1] = "EL2 DHW Profile (S1)"
   SCRShape[1] = "EL2 S-C Refrig Profile (S1)"
   DaylitAreaCurrent[3] = 1
   RoofZoneErrorCode = 4
   ..

ShapeWiz   "EL2 InsLtg Profile (S1)"  
   ..

DayShape   "EL2 ExtLtg DayShape (Jan)"  
   ..

DayShape   "EL2 ExtLtg DayShape (Feb)"  
   ..

DayShape   "EL2 ExtLtg DayShape (Mar)"  
   ..

DayShape   "EL2 ExtLtg DayShape (Apr)"  
   ..

DayShape   "EL2 ExtLtg DayShape (May)"  
   ..

DayShape   "EL2 ExtLtg DayShape (Jun)"  
   ..

DayShape   "EL2 ExtLtg DayShape (Jul)"  
   ..

DayShape   "EL2 ExtLtg DayShape (Aug)"  
   ..

DayShape   "EL2 ExtLtg DayShape (Sep)"  
   ..

DayShape   "EL2 ExtLtg DayShape (Oct)"  
   ..

DayShape   "EL2 ExtLtg DayShape (Nov)"  
   ..

DayShape   "EL2 ExtLtg DayShape (Dec)"  
   ..

ShapeWiz   "EL2 CookEq Profile (S1)"  
   ..

ShapeWiz   "EL2 Misc Profile (S1)"  
   ..

ShapeWiz   "EL2 DHW Profile (S1)"  
   ..

ShapeWiz   "EL2 Occup Profile (S1)"  
   ..

ShapeWiz   "EL2 S-C Refrig Profile (S1)"  
   ..

ZnGrpWiz   "EL2 Ground Floor Core"  
   ShortName = "GndCor"
   ..

ZnGrpWiz   "EL2 Ground Floor Perimeter"  
   ShortName = "GndPrm"
   ..

CustomZone   "Custom Zone 2"  
   NumVerts = 4
   X[1] = 0
   X[2] = 282.85
   X[3] = 282.85
   X[4] = 0
   Y[1] = 0
   Y[2] = 0
   Y[3] = 70.7
   Y[4] = 70.7
   ..

DiagData   "Bldg Envelope & Loads 1 Diag Data"  
   PolyWndGridRes = 2
   PolyWndLwrLeftX = -26
   PolyWndLwrLeftY = -74
   PolyWndWidth = 334.667
   ..

DiagData   "Bldg Envelope & Loads 2 Diag Data"  
   PolyWndGridRes = 4
   PolyWndLwrLeftX = -44
   PolyWndLwrLeftY = -184
   PolyWndWidth = 669.333
   ..

HVACWiz   "HVAC System 1"  
   ScreenIDArrIdx = 5
   ScreenIDArrID = 170
   CoolSource[1] = "DX Coils"
   HeatSource[1] = "No Heating"
   EconomizerType[1] = "- none -"
   AllowCrankcaseHt[1] = 0
   MinAllowedAirflow[1] = 0
   SystemPerWhat[1] = "System per Shell"
   ..

HVACWiz   "HVAC System 2"  
   ScreenIDArrIdx = 5
   ScreenIDArrID = 170
   CoolSource[1] = "DX Coils"
   HeatSource[1] = "No Heating"
   HVACSysType[1] = "Split System Single Zone DX (no heating)"
   ReturnAirPath[1] = "Direct"
   BBDHeatSource[1] = "Hot Water"
   EconomizerType[1] = "- none -"
   AllowCrankcaseHt[1] = 0
   ..

DXCWWiz   "Water-Cooled DX System"  
   ..

WLHPWiz   "WLHP System"  
   ..

GSHPWiz   "GSHP System"  
   ..

PrimWiz   "Primary HVAC Plant"  
   ..

DHWWiz   "DHW Plant"  
   ..

FacetColor   "By Wall Type"  
   FacetType = "Walls"
   ColorOption = "By Wall Type"
   ..

FacetColor   "By Construction"  
   FacetType = "Walls"
   ColorOption = "By Construction"
   ..

FacetColor   "Uniform"  
   FacetType = "Windows"
   ColorOption = "Uniform"
   ..

FacetColor   "By Glass Type"  
   FacetType = "Windows"
   ColorOption = "By Glass Type"
   ..

Light3D   "Light3D - Default"  
   Type = "Default"
   ..

Light3D   "Light3D - User1"  
   Type = "User Defined 1"
   ..

Light3D   "Light3D - User2"  
   Type = "User Defined 2"
   ..

Light3D   "Light3D - User3"  
   Type = "User Defined 3"
   ..

Light3D   "Light3D - User4"  
   Type = "User Defined 4"
   ..

Light3D   "Light3D - User5"  
   Type = "User Defined 5"
   ..


END_OF_FILE