Hi eQUEST world,<br><br>Does this sound about right?<br><br>where <font face="MS UI Gothic">our case is a large-scale 
DHC (District Heating/Cooling plant) which provides steam and chilled water to each individual building within 
the district and we have a LEED modeling effort...<br><br>We are modeling a 17 story office building in the district.<br></font><br>We have two issues:<br><br><b>District Plant: </b>The building does not have it's own plant, but
shares plant with other buildings. This could be modeled by creating a
"virtual" plant within the building and plugging in a virtual rate for
the actual cost of energy from the district plant (you may not have to
create a complicated rate schedule if this is the case and the district
plant sells energy without a lot of complicated ratchets or off/on peak
pricing). The annual cost of energy would typically be lower because of
the efficiency of producing all the energy for a lot of buildings in
one plant designed for a lot of diversity.<br>
<br><b>Combined Heat & Power (CHP):</b> The energy drawn for the
building from the offsite plant creates waste heat that the offsite
plant can convert efficiently into energy that is sold to others. This allows us to give a credit to our
project associated with the sale of by-product energy (in LEED, associated only with
the process load of our building only as I understand things). This
credit would be allocated proportionally to our building's process
energy use and reduces the annual cost of energy for our project.<br><br>The project needs to show compliance with prescriptive & performance requirements of ASHRAE 90.1 independently of the district plant efficiency or CHP credit in order to achieve the LEED prerequisite and credits.<br>
<br>Thanks for any comments/guidance/suggestions on approach!<br>j<br clear="all"><br>-- <br>James Weiner, AIA, Senior LEED Faculty<br>Collaborative Project Consulting<br>721 Rochedale Way<br>Los Angeles, CA 90049<br>310/927.7646