[Equest-users] Error in Defining Glass Specs

[Ahmad Fraij]

 Hello All, 
Further to my email below, please find attached the .inp and .pd2 files for your review if you have time to help me out.
Once I ignore the message below and enter the glass specs and run the simulation, the software stop in the middle of the simulation and close without any messages.
Regards
Ahmad
    On Wednesday, 30 August 2023 at 07:08:15 am AEST, Ahmad Fraij <fraij at yahoo.com> wrote:  
 
 Hello All,
When I try to enter the windows glass specifications (i.e. SC & U values) by selecting "simplified" in specification method, I get the below error message before I enter the values. Did anybody encounter this before. Any help will be highly appreciated.
 

Regards
Ahmad  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20230829/0081579c/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: WH-4.inp
Type: application/octet-stream
Size: 749260 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20230829/0081579c/attachment.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: WH-4.pd2
Type: application/octet-stream
Size: 88470 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20230829/0081579c/attachment-0001.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 1693343249428blob.jpg
Type: image/png
Size: 51491 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20230829/0081579c/attachment.png>