[Equest-users] Terminal not sized error

[Seaman, Ethan]

Without looking at your model it is hard to tell, but this error sounds distantly familiar; I think if you are missing airflow sizing info in your thermal zone.

_______________________________________________
Ethan Seaman
Sustainable Design Analyst
SMMA
t: 617.520.9288
www.smma.com

From: Equest-users <equest-users-bounces at lists.onebuilding.org> On Behalf Of Pramod .D via Equest-users
Sent: Friday, August 25, 2023 12:19 PM
To: PKConsulting via Equest-users <equest-users at lists.onebuilding.org>
Subject: [Equest-users] Terminal not sized error

All,

I am working on a project which has AHUs supplying via series fan powered boxes. I am trying to model this using "Powered Induction Unit". I am getting this error which I am unable to understand. It says, "terminal is not sized, but its air handler is sized.  In this case, the terminal must also be sized. Check design-day criteria, or manually size the terminal." Can somebody please point out what I am missing here? Your help is greatly appreciated.


[cid:image001.jpg at 01D9D999.9D8764A0]

Thanks,
Pramod
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20230828/2fb8245c/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 22704 bytes
Desc: image001.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20230828/2fb8245c/attachment.jpg>