[Equest-users] QUEST stop when in the middle of the simulation

[Morteza Kasmai]

Hi Ahmad,

I applied the PSZ-HP that you created in your model as the “Kitchen TRU” to
all designated zones and clicked on the “Conditioned”. The model runs
without any error or problem. The inp and pd2 files are attached.

Morteza,

Morteza Kasmaei
Senior Architect
LEED AP BD+C, GGP









On Wed, Sep 29, 2021 at 4:55 PM <equest-users-request at lists.onebuilding.org>
wrote:

> Send Equest-users mailing list submissions to
>         equest-users at lists.onebuilding.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
>
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
>
> or, via email, send a message with subject or body 'help' to
>         equest-users-request at lists.onebuilding.org
>
> You can reach the person managing the list at
>         equest-users-owner at lists.onebuilding.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Equest-users digest..."
> Today's Topics:
>
>    1. eQUEST stop when in the middle of the simulation (Ahmad Fraij)
>    2. Re: eQUEST stop when in the middle of the simulation
>       (John Aulbach)
>    3. Re: eQUEST stop when in the middle of the simulation (Ahmad Fraij)
>
>
>
> ---------- Forwarded message ----------
> From: Ahmad Fraij <fraij at yahoo.com>
> To: Fraij via Equest-users <equest-users at lists.onebuilding.org>
> Cc:
> Bcc:
> Date: Wed, 29 Sep 2021 04:12:36 +0000 (UTC)
> Subject: [Equest-users] eQUEST stop when in the middle of the simulation
> Hello Guys,
>
> I have encountered a problem in which when I assign a roof top heat pump
> unit for a zone and run a simulation, eQUEST start the simulation and then
> stop in the middle and close and I have to open it again. However, when I
> delete the roof top unit and assign for the same zone chiller/boiler system
> that is used for the other zones in the same building, it works and
> complete the simulation.
>
> Does anybody can advise what is the problem and how to solve it?
>
> Thank you
>
> Ahmad
>
>
>
> ---------- Forwarded message ----------
> From: John Aulbach <jra_sac at yahoo.com>
> To: Ahmad Fraij <fraij at yahoo.com>, Ahmad Fraij via Equest-users <
> equest-users at lists.onebuilding.org>
> Cc:
> Bcc:
> Date: Wed, 29 Sep 2021 04:46:51 +0000 (UTC)
> Subject: Re: [Equest-users] eQUEST stop when in the middle of the
> simulation
> Can you make your .input and .pd2 available for all to look?
> John R Aulbach, PE
>
> Sent from Yahoo Mail on Android
> <https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature>
>
> On Tue, Sep 28, 2021 at 9:12 PM, Ahmad Fraij via Equest-users
> <equest-users at lists.onebuilding.org> wrote:
> Hello Guys,
>
> I have encountered a problem in which when I assign a roof top heat pump
> unit for a zone and run a simulation, eQUEST start the simulation and then
> stop in the middle and close and I have to open it again. However, when I
> delete the roof top unit and assign for the same zone chiller/boiler system
> that is used for the other zones in the same building, it works and
> complete the simulation.
>
> Does anybody can advise what is the problem and how to solve it?
>
> Thank you
>
> Ahmad
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
>
>
> ---------- Forwarded message ----------
> From: Ahmad Fraij <fraij at yahoo.com>
> To: Ahmad Fraij via Equest-users <equest-users at lists.onebuilding.org>,
> John Aulbach <jra_sac at yahoo.com>
> Cc:
> Bcc:
> Date: Wed, 29 Sep 2021 05:02:14 +0000 (UTC)
> Subject: Re: [Equest-users] eQUEST stop when in the middle of the
> simulation
> Thanks John,
>
> Yes, please find attached the .pd2 and .inp files
>
> Thanks in advance for the help.
>
> Regards
>
> Ahmad
>
> On Wednesday, September 29, 2021, 02:46:59 PM GMT+10, John Aulbach <
> jra_sac at yahoo.com> wrote:
>
>
> Can you make your .input and .pd2 available for all to look?
> John R Aulbach, PE
>
> Sent from Yahoo Mail on Android
> <https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature>
>
> On Tue, Sep 28, 2021 at 9:12 PM, Ahmad Fraij via Equest-users
> <equest-users at lists.onebuilding.org> wrote:
> Hello Guys,
>
> I have encountered a problem in which when I assign a roof top heat pump
> unit for a zone and run a simulation, eQUEST start the simulation and then
> stop in the middle and close and I have to open it again. However, when I
> delete the roof top unit and assign for the same zone chiller/boiler system
> that is used for the other zones in the same building, it works and
> complete the simulation.
>
> Does anybody can advise what is the problem and how to solve it?
>
> Thank you
>
> Ahmad
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
> _______________________________________________
> Equest-users mailing list
> Equest-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20210930/a728d47e/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: School Building-New.pd2
Type: application/octet-stream
Size: 129699 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20210930/a728d47e/attachment.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: School Building-New.inp
Type: application/octet-stream
Size: 505454 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20210930/a728d47e/attachment-0001.obj>