[Equest-users] QUEST stop when in the middle of the simulation

[Ahmad Fraij]

 Thank you Morteza for your help.
Regards
Ahmad
    On Friday, October 1, 2021, 06:01:41 AM GMT+10, Morteza Kasmai via Equest-users <equest-users at lists.onebuilding.org> wrote:  
 
 
Hi Ahmad,

I applied the PSZ-HP that you created in your model as the“Kitchen TRU” to all designated zones and clicked on the “Conditioned”. Themodel runs without any error or problem. The inp and pd2 files are attached. 

Morteza,

Morteza Kasmaei
Senior Architect

LEED AP BD+C, GGP 









On Wed, Sep 29, 2021 at 4:55 PM <equest-users-request at lists.onebuilding.org> wrote:

Send Equest-users mailing list submissions to
        equest-users at lists.onebuilding.org

To subscribe or unsubscribe via the World Wide Web, visit
        http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org

or, via email, send a message with subject or body 'help' to
        equest-users-request at lists.onebuilding.org

You can reach the person managing the list at
        equest-users-owner at lists.onebuilding.org

When replying, please edit your Subject line so it is more specific
than "Re: Contents of Equest-users digest..."
Today's Topics:

   1. eQUEST stop when in the middle of the simulation (Ahmad Fraij)
   2. Re: eQUEST stop when in the middle of the simulation
      (John Aulbach)
   3. Re: eQUEST stop when in the middle of the simulation (Ahmad Fraij)



---------- Forwarded message ----------
From: Ahmad Fraij <fraij at yahoo.com>
To: Fraij via Equest-users <equest-users at lists.onebuilding.org>
Cc: 
Bcc: 
Date: Wed, 29 Sep 2021 04:12:36 +0000 (UTC)
Subject: [Equest-users] eQUEST stop when in the middle of the simulation
Hello Guys,
I have encountered a problem in which when I assign a roof top heat pump unit for a zone and run a simulation, eQUEST start the simulation and then stop in the middle and close and I have to open it again. However, when I delete the roof top unit and assign for the same zone chiller/boiler system that is used for the other zones in the same building, it works and complete the simulation.
Does anybody can advise what is the problem and how to solve it?
Thank you
Ahmad


---------- Forwarded message ----------
From: John Aulbach <jra_sac at yahoo.com>
To: Ahmad Fraij <fraij at yahoo.com>, Ahmad Fraij via Equest-users <equest-users at lists.onebuilding.org>
Cc: 
Bcc: 
Date: Wed, 29 Sep 2021 04:46:51 +0000 (UTC)
Subject: Re: [Equest-users] eQUEST stop when in the middle of the simulation
Can you make your .input and .pd2 available for all to look?John R Aulbach, PE

Sent from Yahoo Mail on Android 
 
  On Tue, Sep 28, 2021 at 9:12 PM, Ahmad Fraij via Equest-users<equest-users at lists.onebuilding.org> wrote:   Hello Guys,
I have encountered a problem in which when I assign a roof top heat pump unit for a zone and run a simulation, eQUEST start the simulation and then stop in the middle and close and I have to open it again. However, when I delete the roof top unit and assign for the same zone chiller/boiler system that is used for the other zones in the same building, it works and complete the simulation.
Does anybody can advise what is the problem and how to solve it?
Thank you
Ahmad_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
  



---------- Forwarded message ----------
From: Ahmad Fraij <fraij at yahoo.com>
To: Ahmad Fraij via Equest-users <equest-users at lists.onebuilding.org>, John Aulbach <jra_sac at yahoo.com>
Cc: 
Bcc: 
Date: Wed, 29 Sep 2021 05:02:14 +0000 (UTC)
Subject: Re: [Equest-users] eQUEST stop when in the middle of the simulation
 Thanks John,
Yes, please find attached the .pd2 and .inp files
Thanks in advance for the help.
Regards
Ahmad
    On Wednesday, September 29, 2021, 02:46:59 PM GMT+10, John Aulbach <jra_sac at yahoo.com> wrote:  
 
 Can you make your .input and .pd2 available for all to look?John R Aulbach, PE

Sent from Yahoo Mail on Android 
 
  On Tue, Sep 28, 2021 at 9:12 PM, Ahmad Fraij via Equest-users<equest-users at lists.onebuilding.org> wrote:   Hello Guys,
I have encountered a problem in which when I assign a roof top heat pump unit for a zone and run a simulation, eQUEST start the simulation and then stop in the middle and close and I have to open it again. However, when I delete the roof top unit and assign for the same zone chiller/boiler system that is used for the other zones in the same building, it works and complete the simulation.
Does anybody can advise what is the problem and how to solve it?
Thank you
Ahmad_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
  
  _______________________________________________
Equest-users mailing list
Equest-users at lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org

_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20210930/d594a133/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: School Building-New.pd2
Type: application/octet-stream
Size: 129699 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20210930/d594a133/attachment-0006.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: School Building-New.inp
Type: application/octet-stream
Size: 505454 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20210930/d594a133/attachment-0007.obj>