[Equest-users] eQUEST stop when in the middle of the simulation

[John Aulbach]

Can you make your .input and .pd2 available for all to look?John R Aulbach, PE

Sent from Yahoo Mail on Android 
 
  On Tue, Sep 28, 2021 at 9:12 PM, Ahmad Fraij via Equest-users<equest-users at lists.onebuilding.org> wrote:   Hello Guys,
I have encountered a problem in which when I assign a roof top heat pump unit for a zone and run a simulation, eQUEST start the simulation and then stop in the middle and close and I have to open it again. However, when I delete the roof top unit and assign for the same zone chiller/boiler system that is used for the other zones in the same building, it works and complete the simulation.
Does anybody can advise what is the problem and how to solve it?
Thank you
Ahmad_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20210929/cbf93f76/attachment.htm>