[Equest-users] SAT Reset Based on Load

[Anthony Hardman]

The help files are pretty good at describing the different reset controls.  For a load based cooling SA reset you’ll want to select the “warmest” input option.

Anthony Hardman, PE, LEED AP BD+C
Senior Building Performance Analyst, Owner

The Green Engineer | Sustainable Design Consulting
D: 978.341.5459  |  O: 978.369.8978
E: anthony at greenengineer.com<mailto:anthony at greenengineer.com>

From: Ahmad Fraij <fraij at yahoo.com>
Sent: Thursday, September 16, 2021 9:35 PM
To: Fraij via Equest-users <equest-users at lists.onebuilding.org>
Subject: [Equest-users] SAT Reset Based on Load

Hello Guys,

How can I reset the supply air temperature of chilled water AHU based on the load in eQuest Software? There is option to reset it based on outside air temperature but I want to reset it based on the load (i.e. based on the VAV Boxes opening percentage).

Regards

Ahmad
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20210917/2fda203b/attachment.htm>