[Equest-users] Hopefully, a simple answer

[David Eldridge]

I think you have entered 1 x 1 x 1 dimensions and need to right click to default the area instead of having it typed in as also 1. Or you could keep the area and default out the dimensions, the dummy zone can be defined as an area and volume only. Either way, but not both.

Are there five separate air intake conditions? Otherwise the MUA units could all take air from one dummy zone if the conditions were the same.

David


David S. Eldridge, Jr., P.E., BEMP, BEAP, HBDP, GGA
Associate

Direct: (847) 316-9224 | Mobile: (773) 490-5038

Grumman/Butkus Associates | 820 Davis Street, Suite 300 | Evanston, IL 60201
Energy Efficiency Consultants and Sustainable Design Engineers

grummanbutkus.com<http://grummanbutkus.com/> | Blog<http://grummanbutkus.com/blog> | Facebook<https://www.facebook.com/pages/GrummanButkus-Associates/1385285015032526> | Twitter<https://twitter.com/grummanbutkus>

From: Equest-users <equest-users-bounces at lists.onebuilding.org> On Behalf Of John Aulbach via Equest-users
Sent: Wednesday, May 12, 2021 8:10 PM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Hopefully, a simple answer

I am using  eQuest 3.65 Build 7173 for this model (by Client request). I am trying to make 5 DOAS outside air zones from which to draw OSA to the various zones. I set up a 1 foot x 1 foot by 1 foot BOX for spaces. But I get the following error messages. WHY?

Thanks,

JOhn
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20210513/b744f4a8/attachment.htm>