[Equest-users] Why the metered energy consumption is two times higher than the energy counsumption reported by PS-H

[Yongqing]

I am woriking on a project that served by loop to loop heat pump.However, when I model it in eQUEST, a very strange probem occured,which is the electricity consumption metered by ELEC-METER is two times higher than the one reported by PS-H.Below is the output screenshot:
PS-H report
PS-F for EM2


The electricity meter is only attached to loop to loop heat pump.








 





 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20201026/a48946fd/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 65764 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20201026/a48946fd/attachment-0004.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 62231 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20201026/a48946fd/attachment-0005.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: PS-F Energy End-Use Summary for, EM2.pdf
Type: application/pdf
Size: 31554 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20201026/a48946fd/attachment-0002.pdf>