[Equest-users] Heating and Cooling Loads per Hours for a thermal zone

[Sharad Kumar]

Hi Konstantina,

The thing that you have found is the variable type in hourly report as
either space or thermal zone.

The hourly report is achieved after and according to this variable type.

If the variable type is space then the report would be as per space type
variable type.
Space is the variable type which can be suspected that the building shell
super-tab and the properties are as per space which henceforth has to be
chosen in the hourly result series menu. As per space mostly not the HVAC
but the room conductance and the occupancy based sensible and latent heat
gain are included which are in the listed menu like wise.
If you would want to inter prate from where all the hourly result series
menu have come then have a closer look at the box out come from the
building tab. Mostly the hourly result series menu can be got from the red
box made below.


[image: image.png]


Now if you want to understand the hourly result series menu from variable
type thermal zone then the properties are as per the box below which is
from the outcome of the Air-side HVAC super-tab.
The thermal zone is related to the hourly series report mainly from the
aspects in the red-box in the image given below.
The thermal zone variable type has the hourly result series menu have
properties like thermostat set-points, cooling, heating out-side air, zone
air temperature and so on.


[image: image.png]

Lastly the type space means from building shell space and thermal zone
means from Air side thermal zone.
Hope this might help.


*Thanks and Regards*
Sharad.Kumar
Freelancer
India.

......................................................................................................................................................

---------- Forwarded message ----------
From: Konstantina Kalliakoudi <kalliakoudi.k at gmail.com>
To: equest-users at lists.onebuilding.org
Cc:
Bcc:
Date: Thu, 21 May 2020 10:28:24 +0300
Subject: Re: [Equest-users] Equest-users Digest, Vol 146, Issue 9 -Heating
and Cooling Loads per Hours for a thermal zone (Konstantina Kalliakoudi)
Dear equest users,

I think I found the answer, for more information I neet to target at the
space...

[image: image.png]

And I have a question to add.
By equest Thermal Zone, means Space+Systems?

So if I need Space information, I have to follow the screenshot?

Thank you very much
Konstantina Kalliakoudi
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20200522/f1950bab/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 30231 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20200522/f1950bab/attachment.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 108368 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20200522/f1950bab/attachment-0001.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 110574 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20200522/f1950bab/attachment-0002.png>