[Equest-users] FW: How to tell if a model used DOE2.2 or DOE2.3?

[Brian Fountain]

We were looking at that yesterday coincidentally.  In the .pd2 if you see the line:

   DOE2Version = "Design Sizing"

... then it is a DOE-2.3 file.

DOE-2.2 files do not have the DOE2Version parameter written in the .pd2.

Regards,

Brian

Footprint

Brian Fountain
Associate
d 416 572 8501 m 416 562 6831

From: Equest-users <equest-users-bounces at lists.onebuilding.org<mailto:equest-users-bounces at lists.onebuilding.org>> On Behalf Of Phil Jordan via Equest-users
Sent: May 8, 2020 12:59 PM
To: equest-users at lists.onebuilding.org<mailto:equest-users at lists.onebuilding.org>
Subject: [Equest-users] How to tell if a model used DOE2.2 or DOE2.3?

CAUTION: EXTERNAL SENDER
Is there a way to tell which version of DOE eQUEST 3.65-7175 should be set to before opening a model file?

If I right-click the .pd2 I see the eQUEST software version number to use, but I don't see any indication of which DOE version to use (2.2 or 2.3). I usually just open it in whichever I currently have it set to, and if it gives errors I try opening it again with the other version set.

Thanks,

Phil Jordan
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20200508/3f10bdd6/attachment.html>