[Equest-users] How to tell if a model used DOE2.2 or DOE2.3?

[Bishop, Bill]

Hi Phil,

If you open the BDL file with a text editor, the DOE-2 version is shown on line 52.

Regards,

~Bill



William Bishop, PE, BEMP, BEAP, CEM, LEED AP
Senior Energy Engineer

T: (585) 698-1956                      F: (585) 325-6005
bbishop at pathfinder-ea.com        www.pathfinder-ea.com<http://www.pathfinder-ea.com>
134 South Fitzhugh Street
Rochester, NY 14608

________________________________
From: Equest-users [equest-users-bounces at lists.onebuilding.org] on behalf of Phil Jordan via Equest-users [equest-users at lists.onebuilding.org]
Sent: Friday, May 08, 2020 12:59 PM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] How to tell if a model used DOE2.2 or DOE2.3?

Is there a way to tell which version of DOE eQUEST 3.65-7175 should be set to before opening a model file?

If I right-click the .pd2 I see the eQUEST software version number to use, but I don’t see any indication of which DOE version to use (2.2 or 2.3). I usually just open it in whichever I currently have it set to, and if it gives errors I try opening it again with the other version set.

Thanks,

Phil Jordan