[Equest-users] Solar illuminance hourly data

[Calvin Chu]

Hi Anil,

I think you can do that by specifying the following in the hourly reports.
See the attached image:

[image: image.png]

Hope this helps,
Calvin

On Thu, Nov 21, 2019 at 8:29 AM Anil Jangid via Equest-users <
equest-users at lists.onebuilding.org> wrote:

> Dear folks,
>
> Is there any way to get solar illuminance (Lux) hourly data on a glass. Software
> like energy plus, eQuest or any other.
>
> Thanks in advance.
>
>
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>


-- 
*Calvin Chu, MFBA, EIT*
Energy Modeler
646-780-5536 | cchu at brightpower.com
www.brightpower.com
<http://www.brightpower.com/?utm_source=email&utm_medium=signature>
11 Hanover Square, 21st Floor
New York, NY 10005
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20191121/4c127348/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 57227 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20191121/4c127348/attachment-0002.png>