[Equest-users] VRF Heating COP in eQUEST

[Porter, Frederick NOR]

So, in the VRF interface I can enter Cooling EIR, but Heating EIR is calculated somehow from other inputs:

[cid:image001.png at 01D51AF9.1943CBB0]

The 0.3 above is actually 0.29, reflected below. But how best to get the heating EIR to 0.30, instead of 0.34? I was thinking of changing some of these "Heating Rated" temperatures. But I'd like to know if someone else has done this successfully.

[cid:image002.png at 01D51AFA.109C69D0]

Fred

Fred Porter, LEED© AP
Principal Engineer
Sustainability Services
NORESCO

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20190604/f51ec9a9/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 40375 bytes
Desc: image001.png
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20190604/f51ec9a9/attachment.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.png
Type: image/png
Size: 12957 bytes
Desc: image002.png
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20190604/f51ec9a9/attachment-0001.png>