[Equest-users] eQuest T-24 Compliance with DOE 2.3

Paul Riemer Paul.Riemer at dunhameng.com
Wed Jun 26 10:17:46 PDT 2019


EnergySoft has put 2019 Title 24 standards into EnergyPro version 8 but it is not yet certified.
http://www.energysoft.com/energypro-8/

Paul Riemer, PE, LEED AP BD+C
Senior Associate / Mechanical
DUNHAM

From: Equest-users [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Paul Riemer via Equest-users
Sent: Tuesday, June 25, 2019 1:46 PM
To: 'equest-users at lists.onebuilding.org'
Subject: Re: [Equest-users] eQuest T-24 Compliance with DOE 2.3

And I believe projects permitting after January 1 are subject to the 2019 Standards. The only currently available 2019 Non-Residential package that I have found is http://bees.archenergy.com/software2019.html<http://bees.archenergy.com/software2019.html> .  If others know better, please share.

Paul Riemer, PE, LEED AP BD+C
Senior Associate / Mechanical
DUNHAM

From: Equest-users [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Erik Kolderup via Equest-users
Sent: Tuesday, June 25, 2019 1:24 PM
To: Tom Mickley
Cc: equest-users at lists.onebuilding.org
Subject: Re: [Equest-users] eQuest T-24 Compliance with DOE 2.3

Sorry to say that eQUEST is not currently a certified program for Title 24 compliance. You will need to use one of the programs listed on this page: https://ww2.energy.ca.gov/title24/2016standards/2016_computer_prog_list.html<https://ww2.energy.ca.gov/title24/2016standards/2016_computer_prog_list.html>.

I'm not aware of a way to convert your eQUEST file for use in one of the certified programs, but perhaps others know of a way you can save some time.

Regards,
Erik
Erik Kolderup, PE, LEED AP
erik at kolderupconsulting.com<mailto:erik at kolderupconsulting.com> | 415.531.5198 | www.kolderupconsulting.com<http://www.kolderupconsulting.com>


On Tue, Jun 25, 2019 at 11:18 AM Tom Mickley via Equest-users <equest-users at lists.onebuilding.org<mailto:equest-users at lists.onebuilding.org>> wrote:
Hello all,

This is my first project dealing with a building in California.  This is a complete office renovation that needs to be compliant with title 24.  I started the project in version 3.65 build 7175 with DOE 2.3.  I have a good portion of the building complete in detailed mode.  The model freezes and closes every time I go to the project data tab in project properties and click CEC Title 24, August 2009 V1 from the dropdown of energy code compliance.  Is there a way to run the compliance in DOE 2.3?  I made a quick building in version DOE 2.2 to check and it worked fine.  Do I need to convert the existing model to 2.2 to work?  If so, how?  I tried copying and pasting the INP file of 2.3 to 2.2 and it crashes too.

Is there an easy way around this or do I need to start from scratch? I already have about 40 hours into this model so I’m trying not to resort to this, but I keep running into road blocks with every attempt.

Also, I just tried to run the simulation and it took about four hours to get to 98% and then froze the computer.  The file size is 61.7 gig….  The building isn’t very large so I have no clue how the file got so large.

Sorry for sending this a third time, but I’ve not got an answer.  Is there another forum and/or website that I could post this question on that would be more appropriate?


Thanks in advance,

Tom

_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org<http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org>
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG<mailto:EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20190626/8548a12b/attachment-0001.htm>


More information about the Equest-users mailing list