[Equest-users] eQuest T-24 Compliance with DOE 2.3

[Erik Kolderup]

Sorry to say that eQUEST is not currently a certified program for Title 24
compliance. You will need to use one of the programs listed on this page:
https://ww2.energy.ca.gov/title24/2016standards/2016_computer_prog_list.html
.

I'm not aware of a way to convert your eQUEST file for use in one of the
certified programs, but perhaps others know of a way you can save some time.

Regards,
Erik
*Erik Kolderup, PE, LEED AP*
erik at kolderupconsulting.com | 415.531.5198 | www.kolderupconsulting.com


On Tue, Jun 25, 2019 at 11:18 AM Tom Mickley via Equest-users <
equest-users at lists.onebuilding.org> wrote:

> Hello all,
>
>
>
> This is my first project dealing with a building in California.  This is a
> complete office renovation that needs to be compliant with title 24.  I
> started the project in version 3.65 build 7175 with DOE 2.3.  I have a good
> portion of the building complete in detailed mode.  The model freezes and
> closes every time I go to the project data tab in project properties and
> click CEC Title 24, August 2009 V1 from the dropdown of energy code
> compliance.  Is there a way to run the compliance in DOE 2.3?  I made a
> quick building in version DOE 2.2 to check and it worked fine.  Do I need
> to convert the existing model to 2.2 to work?  If so, how?  I tried copying
> and pasting the INP file of 2.3 to 2.2 and it crashes too.
>
>
>
> Is there an easy way around this or do I need to start from scratch? I
> already have about 40 hours into this model so I’m trying not to resort to
> this, but I keep running into road blocks with every attempt.
>
>
>
> Also, I just tried to run the simulation and it took about four hours to
> get to 98% and then froze the computer.  The file size is 61.7 gig….  The
> building isn’t very large so I have no clue how the file got so large.
>
>
>
> Sorry for sending this a third time, but I’ve not got an answer.  Is there
> another forum and/or website that I could post this question on that would
> be more appropriate?
>
>
>
>
>
> Thanks in advance,
>
>
>
> Tom
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20190625/c9302d18/attachment-0001.htm>