[Equest-users] Need separate total consumption for different different zones served by same chiller

[RiseUp]

Hi All,

i am modelling building which has residential + commercial areas.whereas
single chiller is serving for both the areas. So i have created different
utility meters for both the system as indicated below:
[image: image.png][image: image.png]
But After Simulation i am not able to find out separate consumption for
cooling,Heating & space rejection.
[image: image.png]
So please help me out to find out separate consumption in every sector & to
find out total consumption to calculate separate EPI for residential &
commercial block.

Regards,
Vishal
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20190709/27a10ba9/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 34181 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20190709/27a10ba9/attachment.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 23246 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20190709/27a10ba9/attachment-0001.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 28195 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20190709/27a10ba9/attachment-0002.png>