[Equest-users] UA Convergence Error

Sharad Kumar sharadcapricious at gmail.com
Tue Dec 10 18:40:37 PST 2019


Hi Paul,

The way to have a heat  exchanger in the model is as follows:

The Heat exchanger is made as follows with the project tree right click.

[image: image.png]
By right click on the project we can have heat exchanger which is as
follows:

[image: image.png]

Then by double click on the heat exchanger we can have the heat exchanger
dialogue as follows.

[image: image.png]

So in this way we can have a heat exchanger made in the built.


*Thanks and regards*,
Sharad.Kumar
Freelancer.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20191211/7efab55b/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 92761 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20191211/7efab55b/attachment-0006.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 50320 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20191211/7efab55b/attachment-0007.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 42922 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20191211/7efab55b/attachment-0008.png>


More information about the Equest-users mailing list