[Equest-users] Question on Energy consumption results

Mon Sep 24 10:42:10 PDT 2018

PFA Files-.inp & pd2

FYI- If I switch daylight off for shell component-Floor 5, the simulation
runs otherwise it shows error.

I have switched on daylight for rest of the shell component to observe area
light changes.

On Mon, Sep 24, 2018 at 11:00 PM Nicholas Caton <
Nicholas.Caton at schneider-electric.com> wrote:

> A quick reminder:  If you have progressed past the wizard mode, you’ll
> need to share both the .pd2 and the .inp for others to be able to open your
> model and see what’s on your screen ;-).
>
>
>
> *Nick Caton, P.E., BEMP*
>
>   Senior Energy Engineer
>   Regional Energy Engineering Manager
>
>   Energy and Sustainability Services
>   Schneider Electric
>
> D  913.564.6361
> M  785.410.3317
> F  913.564.6380
> E  nicholas.caton at schneider-electric.com
>
> 15200 Santa Fe Trail Drive
> Suite 204
> Lenexa, KS 66219
> United States
>
>
>
>
>
> *From:* Akshat Kabra <akshatspin at gmail.com>
> *Sent:* Monday, September 24, 2018 9:38 AM
> *To:* Nicholas Caton <Nicholas.Caton at schneider-electric.com>
> *Cc:* The Energy Simulation Academy <info at simulate.energy>;
> equest-users at onebuilding.org
> *Subject:* Re: [Equest-users] Question on Energy consumption results
>
>
>
> [External email: Use caution with links and attachments]
> ------------------------------
>
>
>
> Hi,
>
>
>
>
>
> I checked it for already defined glass library by comparing single and
> double glass unit with varying specs, the area light is not changing.
>
>
>
> I have customised the windows and curtain wall required for the project
> and have customised glass specification depending on U value, SC, VLT.
>
> Base case
>
> U value- 1 Btu/h-ft2-F
>
> SC-0.42
>
> VLT-0.26
>
>
>
> I need to check with DGU glass and overhangs what would be energy
> consumption.
>
>
>
> When I switch on the  daylight control for all shell components, the
> simulation run says error.
>
>
>
> I am attaching the file .
>
> Please check by changing the SC and VLT, is the area light consumption
> changing?
>
>
>
> Thanks
>
>
>
>
>
>
>
>
>
> On Mon, Sep 24, 2018 at 7:44 PM Nicholas Caton <
> Nicholas.Caton at schneider-electric.com> wrote:
>
> Hello!
>
>
>
> If I had to make a guess, a relatively common issue I’ve uncovered would
> start with checking whether the glass being revised, before editing, is
> using the glass library specification method (i.e. your glass is defined
> via code like 2004).  In that scenario, you are permitted to add/define
> inputs used with the simplified method of defining glass like VIS-TRANS and
> GLASS-CONDUCT through parametric inputs, but they won’t “hook” and
> accomplish anything.  You’d need to swap your glass inputs over to
> simplified first, or else look up another library entry appropriate for
> your VLT switch and edit that assignment instead.
>
>
>
> If this doesn’t cover it, there are a myriad of daylighting-related inputs
> which may throw off the expected behavior.  It would probably be most
> time-efficient for you to share a copy of the model files (pd2/inp) with
> the list, and to indicate the specific window(s) you are expecting to
> observe results by editing.  It would also in that context be helpful to
> know whether you used the wizards to help you set up the space daylighting
> inputs before toggling to “No” daylighting.
>
>
>
> ~Nick
>
>
>
>
>
> *Nick Caton, P.E., BEMP*
>
>   Senior Energy Engineer
>   Regional Energy Engineering Manager
>
>   Energy and Sustainability Services
>   Schneider Electric
>
> D  913.564.6361
> M  785.410.3317
> F  913.564.6380
> E  nicholas.caton at schneider-electric.com
>
> 15200 Santa Fe Trail Drive
> Suite 204
> Lenexa, KS 66219
> United States
>
>
>
>
>
> *From:* Equest-users <equest-users-bounces at lists.onebuilding.org> *On
> Behalf Of *The Energy Simulation Academy via Equest-users
> *Sent:* Sunday, September 23, 2018 10:20 AM
> *To:* Akshat Kabra <akshatspin at gmail.com>
> *Cc:* equest-users at lists.onebuilding.org
> *Subject:* Re: [Equest-users] Question on Energy consumption results
>
>
>
> What's the VLT values thay you're using?
>
> On Sun, Sep 23, 2018, 08:16 Akshat Kabra via Equest-users <
> equest-users at lists.onebuilding.org> wrote:
>
> Hi,
>
>
>
> I am modelling on Design Development wizard, I am changing VLT of glass ,
> but there is no change in area lights consumption.
>
> Why is it so ?
>
>
>
> I have switched off daylight control.
>
> When I switch on , the results show changes.
>
>
>
> Regards
>
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> <https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.onebuilding.org%2Flistinfo.cgi%2Fequest-users-onebuilding.org&data=02%7C01%7CNicholas.Caton%40schneider-electric.com%7C9fbb8c57621747a6c01708d6222b6400%7C6e51e1adc54b4b39b5980ffe9ae68fef%7C0%7C0%7C636733967088959874&sdata=LPCxyZJ%2Fb9IcoI5YS4Ua6ibS3lwvolAL224yKaUBZkw%3D&reserved=0>
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
> ______________________________________________________________________
> This email has been scanned by the Symantec Email Security.cloud service.
> ______________________________________________________________________
>
>
> ______________________________________________________________________
> This email has been scanned by the Symantec Email Security.cloud service.
> ______________________________________________________________________
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20180924/3c5f1daa/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 255 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20180924/3c5f1daa/attachment.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.png
Type: image/png
Size: 8477 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20180924/3c5f1daa/attachment-0001.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 255 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20180924/3c5f1daa/attachment-0002.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Project 16 - Baseline Design.inp
Type: application/octet-stream
Size: 253381 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20180924/3c5f1daa/attachment.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Project 16.pd2
Type: application/octet-stream
Size: 125739 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20180924/3c5f1daa/attachment-0001.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Project 16.inp
Type: application/octet-stream
Size: 270416 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20180924/3c5f1daa/attachment-0002.obj>