[Equest-users] Question on Energy consumption results

[umesh atre]

In eQUEST, the VLT should not matter unless you have the daylighting
controls turned on, which is in line with what you seem to have discovered
already.
Once you turn daylighting on, and based on your daylighting inputs, you
should typically see changes to a few end-uses including lighting, cooling,
heating, and fans.

On Sun, Sep 23, 2018 at 10:19 AM, The Energy Simulation Academy via
Equest-users <equest-users at lists.onebuilding.org> wrote:

> What's the VLT values thay you're using?
>
> On Sun, Sep 23, 2018, 08:16 Akshat Kabra via Equest-users <
> equest-users at lists.onebuilding.org> wrote:
>
>> Hi,
>>
>> I am modelling on Design Development wizard, I am changing VLT of glass ,
>> but there is no change in area lights consumption.
>> Why is it so ?
>>
>> I have switched off daylight control.
>> When I switch on , the results show changes.
>>
>> Regards
>>
>> _______________________________________________
>> Equest-users mailing list
>> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
>> To unsubscribe from this mailing list send  a blank message to
>> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20180924/a1ea4c38/attachment-0002.htm>