[Equest-users] Starnge happenings with Wizard mode

[John Aulbach]

Got a real rip roarin for such a simple mode..This is in 3.65, Build 7173.
I am helping a client who was given this model. It is currently in the Detail Edit mode. I made a copy, turned it back into a Wizard model, and discovered Wizard EEMs. I ran it in Wizard mode to see how the EEMs faird. It turns out the last EEM shows no savings (hot water reset). 
So I removed the EEM from the batch and ran again. THIS time, no savings were shown for the new last EEM (chilled water higher temp).
I then put back the Hot Water EEM. NOW BOTH the hot water and chilled water EEM show zero savings.
I usually fly in the Detail Edit and Parametric world.
Has ANYONE ever experienced such strange behavior in Wizard? Model attached.
John R Aulbach
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20181116/7a34d3f6/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 660 PX Jan 24 2017.inp
Type: application/octet-stream
Size: 56331 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20181116/7a34d3f6/attachment.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 660 PX Jan 24 2017.pd2
Type: application/octet-stream
Size: 13815 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20181116/7a34d3f6/attachment-0001.obj>