[Equest-users] Equest Duct Losses Question

Jones, Christopher Christopher.r.Jones at wsp.com
Wed Nov 28 11:39:01 PST 2018


I believe the split-system residential assumes a ductless system. Condenser outside and fan coil unit wall/ceiling or floor mounted inside.

Christopher R Jones, P.Eng.
T+ 1 416-644-0252

[cid:image003.png at 01D48728.18D4D530]

From: Equest-users [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of WIGGINS, BRIAN via Equest-users
Sent: Wednesday, November 28, 2018 9:49 AM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Equest Duct Losses Question

Hello everyone,

I have a question.  I want to look at a scenario of energy consumption and costs for ductwork thermal and leakage losses outside the thermal envelope as compared to the ductwork being inside the thermal envelope.  Below is the key information.  I saw under the detailed data edit mode, the option to imput duct losses information under the air side tab.  My understanding is that you can estimate a leakage rate based on the percentage of air lost in the duct system.  Also, the thermal losses can be estimated either by the UA of the ductwork or the temperature difference between the supply temp and air distribution supply temp to the space.  I opted to choose the UA option.  Below is the information that I input.


Description of Value

Value

Units

Ductwork R Value

4.7

ft2·°F·h/BTU

Ductwork Leakage Rate

0.15

Percent

Estimated Supply Ductwork Surface Area

           1,440

Square Feet

New Unit Rating

15

SEER

Return Duct Surface Area

240

Square Feet







UA for Supply Duct

               306

Btu/h-F

UA for Return Duct

51

Btu/h-F

Duct Zone

Roof Zone




There are a couple of things that I have noticed.

  1.  When I select a residential system (split system), the duct leakage option is grayed out under duct losses.  Why is that?
  2.  When I change the information for the duct losses as shown, to 0 for the UA of the supply and return duct, and 0 for the leakage rate, I get the same values for the LS-D and LS-E reports for the MBTUs for the roof zone.
I am new to equest and any help you can give me will be greatly appreciated.

Thanks,
Brian Wiggins
(803)-521-4991


________________________________


NOTICE: This communication and any attachments ("this message") may contain information which is privileged, confidential, proprietary or otherwise subject to restricted disclosure under applicable law. This message is for the sole use of the intended recipient(s). Any unauthorized use, disclosure, viewing, copying, alteration, dissemination or distribution of, or reliance on, this message is strictly prohibited. If you have received this message in error, or you are not an authorized or intended recipient, please notify the sender immediately by replying to this message, delete this message and all copies from your e-mail system and destroy any printed copies. You are receiving this communication because you are listed as a current WSP contact. Should you have any questions regarding WSP's electronic communications policy, please consult our Anti-Spam Commitment at www.wsp.com/casl<http://www.wsp.com/casl>. For any concern or if you believe you should not be receiving this message, please forward this message to caslcompliance at wsp.com<mailto:caslcompliance at wsp.com> so that we can promptly address your request. Note that not all messages sent by WSP qualify as commercial electronic messages.

AVIS : Ce message, incluant tout fichier l'accompagnant (« le message »), peut contenir des renseignements ou de l'information privilégiés, confidentiels, propriétaires ou à divulgation restreinte en vertu de la loi. Ce message est destiné à l'usage exclusif du/des destinataire(s) voulu(s). Toute utilisation non permise, divulgation, lecture, reproduction, modification, diffusion ou distribution est interdite. Si vous avez reçu ce message par erreur, ou que vous n'êtes pas un destinataire autorisé ou voulu, veuillez en aviser l'expéditeur immédiatement et détruire le message et toute copie électronique ou imprimée. Vous recevez cette communication car vous faites partie des contacts de WSP. Si vous avez des questions concernant la politique de communications électroniques de WSP, veuillez consulter notre Engagement anti-pourriel au www.wsp.com/lcap<http://www.wsp.com/lcap>. Pour toute question ou si vous croyez que vous ne devriez pas recevoir ce message, prière de le transférer au conformitelcap at wsp.com<mailto:conformitelcap at wsp.com> afin que nous puissions rapidement traiter votre demande. Notez que ce ne sont pas tous les messages transmis par WSP qui constituent des messages electroniques commerciaux.



-LAEmHhHzdJzBlTWfa4Hgs7pbKl
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20181128/b7d156c0/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image003.png
Type: image/png
Size: 1860 bytes
Desc: image003.png
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20181128/b7d156c0/attachment-0003.png>


More information about the Equest-users mailing list