[Equest-users] Wizard mode greyed out?

[Bishop, Bill]

Hi Tianyao,
My guess is that the original model was not created using one of the Wizards. Were you provided a pd2 file for the model you inherited?
~Bill

William Bishop, PE, BEMP, BEAP, CEM, LEED AP
Senior Energy Engineer

[Pathfinder-EA-logo-2]T: (585) 698-1956                        F: (585) 325-6005
bbishop at pathfinder-ea.com<mailto:wbishop at pathfinder-ea.com>        www.pathfinder-ea.com<http://www.pathfinder-ea.com/>
134 South Fitzhugh Street
Rochester, NY 14608               [cid:image005.png at 01D47770.0C7195C0]         Ask me why Carbon Fee & Dividend may be right for you.

From: Equest-users <equest-users-bounces at lists.onebuilding.org> On Behalf Of Tianyao Zhang via Equest-users
Sent: Thursday, November 8, 2018 2:18 PM
To: jra_sac at yahoo.com
Cc: equest-users at lists.onebuilding.org
Subject: Re: [Equest-users] Wizard mode greyed out?

Thanks for your reply John, I understand I will be losing all edits (that's fine), but under Mode the Wizard option is greyed out (see screenshot below) and I'm not sure why.

[image.png]

Thanks,
Tianyao

On Thu, Nov 8, 2018 at 1:14 PM John Aulbach <jra_sac at yahoo.com<mailto:jra_sac at yahoo.com>> wrote:
You should make a copy of the run first. You are in the Detail Edit mode, and will lose any edits made past the Wizard mode. This can include schedule changes. But now I believe you can go to Mode (do not have eQuest in front of me). You will get a warning that you will lose all your edits. But this is a copy, so proceed to switch back to DD Wizard.

John
Sent from Yahoo Mail on Android<https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature>

On Thu, Nov 8, 2018 at 11:08 AM, Tianyao Zhang via Equest-users
<equest-users at lists.onebuilding.org<mailto:equest-users at lists.onebuilding.org>> wrote:

Hi All,



I ran into this issue recently and was hoping someone could help me out –



I inherited a model and needed to go back to the Wizard mode to make some system changes, but the “Wizard Data Edit” under Mode is greyed out (screenshot below), for some reason. Does anyone know how to go around this and access the Wizard mode? Thank you in advance!


[image.png]

Regards,
Tianyao
_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG<mailto:EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20181108/7a84f4ea/attachment-0002.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 9336 bytes
Desc: image001.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20181108/7a84f4ea/attachment-0008.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image005.png
Type: image/png
Size: 1554 bytes
Desc: image005.png
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20181108/7a84f4ea/attachment-0008.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image006.png
Type: image/png
Size: 51972 bytes
Desc: image006.png
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20181108/7a84f4ea/attachment-0009.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.jpg
Type: image/jpeg
Size: 1903 bytes
Desc: image002.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20181108/7a84f4ea/attachment-0009.jpg>