[Equest-users] How to set thermostat to have 0 heating load

[John Aulbach]

Would you kindly send your .inp and .PD2 so we in the forum might see what is happening?

Sent from Yahoo Mail on Android 
 
  On Tue, Mar 27, 2018 at 1:20 PM, Jing Hong<hongjing.shirley at gmail.com> wrote:   Hi John,
After removing the whole heating thermostat schedule, the program still shows space heat. Do you know if eQuest allow users to trace back the space heat & cool for each zone?
Thank you,
Jing
On Tue, Mar 27, 2018 at 2:35 PM, John Aulbach <jra_sac at yahoo.com> wrote:

 I believe if you remove the heating thermostat schedule, the program will show no heating.
John R. Aulbach, PE
    On Tuesday, March 27, 2018, 8:13:01 AM PDT, Jing Hong via Equest-users <equest-users at lists. onebuilding.org> wrote:  
 
 Dear All,
I am modeling a baseline system 10 Heating and Ventilation. But actually I do not need heating but only ventilation. So I set the thermostat schedule and design temperature to 40F to avoid heating load. However, I still got space heat at the report. Have any of you run into this problem before?  How to solve it?
Thank you very much!Jing

-- 
PhD Candidate, LEED AP BD+C
School of Architecture and Urban PlanningUniversity of Wisconsin-Milwaukee
______________________________ _________________
Equest-users mailing list
http://lists.onebuilding.org/ listinfo.cgi/equest-users- onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE@ ONEBUILDING.ORG
  



-- 
PhD Candidate, LEED AP BD+C
School of Architecture and Urban PlanningUniversity of Wisconsin-Milwaukee
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20180327/5eb0899e/attachment-0001.html>