[Equest-users] How to set thermostat to have 0 heating load

[John Aulbach]

 I believe if you remove the heating thermostat schedule, the program will show no heating.
John R. Aulbach, PE
    On Tuesday, March 27, 2018, 8:13:01 AM PDT, Jing Hong via Equest-users <equest-users at lists.onebuilding.org> wrote:  
 
 Dear All,
I am modeling a baseline system 10 Heating and Ventilation. But actually I do not need heating but only ventilation. So I set the thermostat schedule and design temperature to 40F to avoid heating load. However, I still got space heat at the report. Have any of you run into this problem before?  How to solve it?
Thank you very much!Jing

-- 
PhD Candidate, LEED AP BD+C
School of Architecture and Urban PlanningUniversity of Wisconsin-Milwaukee
_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20180327/c19ac3e8/attachment-0001.html>