[Equest-users] Walk-in refrigeration

[Jing Hong]

Thank you Brian, I chose all the unconditioned and uninstalled for the
options. But for air-side HVAC system type, I had to choose one of the
systems. So I chose unit heater, but leave the heating source as "not
installed". Will that work?

Jing

On Thu, Mar 15, 2018 at 10:08 AM, Brian Fountain <bfountain at greensim.com>
wrote:

> To do what you are suggesting, it can be an unconditioned zone.
>
> The alternative is for it to be a dedicated zone on its own PSZ system.
>
> *From: *Jing Hong via Equest-users
> *Sent: *Thursday, March 15, 2018 11:02 AM
> *To: *equest-users at lists.onebuilding.org; equest-users at onebuilding.org
> *Reply To: *Jing Hong
> *Subject: *[Equest-users] Walk-in refrigeration
>
> Dear All,
>
> I have a walk-in refrigeration room, and I am trying to ignore it in the
> Air-side or Water- side HVAC tab. How to do that? I cannot delete it from
> HVAC, coz equest will report an error. I cannot ignore it in the building
> shell and internal loads, coz I need input its process load. What should I
> do to deal with this room?
>
> Jing
>
> --
> PhD Candidate, LEED AP BD+C
>
> School of Architecture and Urban Planning
> University of Wisconsin-Milwaukee
>
>
>


-- 
PhD Candidate, LEED AP BD+C

School of Architecture and Urban Planning
University of Wisconsin-Milwaukee
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20180315/755bc29f/attachment.html>