[Equest-users] Modelling a Thermal Energy Storage Unit in eQUEST

[Damon Lapping]

Good Day,

 

I have modelled a single packaged DX Coil system with a furnace.

 

I now to need to model a thermal energy storage system, basically an ice
battery to provide cooling during peak hours for fours a day.

 

The ice battery will be recharged during off peak hours then during peak
hours the ice system will provide the AC with ice-chilled refrigerant
removing the requirement for the compressor to run.

 

How can I model this system in Equest with my existing single packaged unit?

 

Thanks

 

Regards

 

DAMON LAPPING

Managing Consultant

 <mailto:damon at greenlogik.co.za> damon at greenlogik.co.za

 <http://www.greenlogik.co.za/about.html> www.greenlogik.co.za |
<http://www.pvsystem.co.za/> www.pvsystem.co.za

T.    +27 21 (0) 87 470 0650    F.   +27 (0) 86 763 1323

C.   +27 82 339 3865



UNIDO Certified Energy Management Professional 

SA Green Building Council Existing Building Performance Accredited 

Professional 

 



 



---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20180312/e3b388aa/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 11078 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20180312/e3b388aa/attachment.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.jpg
Type: image/jpeg
Size: 14035 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20180312/e3b388aa/attachment-0001.jpg>