[Equest-users] Loop to Loop Heat Pump Error

[David Eldridge]

Hopefully Nick’s software version control works. If not, maybe you can track down those keywords in the BDL(?) file – I forget – the file with the compiled syntax, where the INP doesn’t echo back fields with default values?

David


David S. Eldridge, Jr., P.E., LEED AP BD+C, BEMP, BEAP, HBDP
Grumman/Butkus Associates



From: Equest-users [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of PKConsulting via Equest-users
Sent: Tuesday, March 06, 2018 6:53 PM
To: Nicholas Caton <Nicholas.Caton at schneider-electric.com>
Cc: equest-users at onebuilding.org
Subject: Re: [Equest-users] Loop to Loop Heat Pump Error

Thanks David,  at this point I just don’t know.  I looked through the .inp file too and couldn’t find those keywords either.  That is when I turned to the group for more help.
I’m completely stumped on this one...
Pasha
Ph: 308-763-1593

On Mar 6, 2018, at 4:10 PM, Nicholas Caton <Nicholas.Caton at schneider-electric.com<mailto:Nicholas.Caton at schneider-electric.com>> wrote:
Would it bug you to learn this loads and simulates without error on my end?

Gut check:  are you being deliberate to open and simulate with the “release testing” build 7174?

~Nick

<image001.png>
Nick Caton, P.E., BEMP
  Senior Energy Engineer
  Regional Energy Engineering Manager
  Energy and Sustainability Services
  Schneider Electric

D  913.564.6361
M  785.410.3317
F  913.564.6380
E  nicholas.caton at schneider-electric.com<mailto:nicholas.caton at schneider-electric.com>

15200 Santa Fe Trail Drive
Suite 204
Lenexa, KS 66219
United States

<image002.png>



From: Equest-users [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Pasha Korber-Gonzalez via Equest-users
Sent: Tuesday, March 06, 2018 3:11 PM
To: eQUEST Users List <equest-users at lists.onebuilding.org<mailto:equest-users at lists.onebuilding.org>>
Subject: [Equest-users] Loop to Loop Heat Pump Error

Hi All,

does anyone have any experience with modeling the Loop to Loop Heat Pump chiller?  I'm getting the following error in my file, and right now I am auto-sizing everything just to test it to get the file to run.  I cannot locate/find where the Qhx Design, SupFlow, SupTi, SupTo key words are linked too.  The heat-Exchanger: HRC-T1 is the name of my LtLHP Chiller that I input on the loops.

I've looked through the DOE-2 documents for LtLHP chiller and I can't find where this error is occurring so that I can fix it.  Any insight you can offer will be appreciated.

I've also attached my .pd2 & .inp files if anyone is inclined to look at them.  Thanks in advance for sharing your thoughts and your brains with me!


 ***ERROR***********************************************************************
             Heat-Exchanger: HRC-T1                           has
             inconsistent design parameters:
              QhxDesign   SupFlow     SupTi     SupTo
               3541040.      708.      85.0      95.0
                          DemFlow     DemTi     DemTo
                             708.      85.0      75.0


Pasha
Ph: 308-763-1593

______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
______________________________________________________________________
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20180307/12af07e3/attachment-0002.htm>