[Equest-users] Zones with different roof height on same floor

John Aulbach jra_sac at yahoo.com
Mon Jul 30 13:15:36 PDT 2018


 A quickie from me. Make each zone a different shell. Then, I believe, you can do your different roof heights. Detail Edit Mode is best. Sorry i do not have time to create an example.
John R. Aulbach, PE
    On Monday, July 30, 2018, 3:43:05 AM PDT, equest user via Equest-users <equest-users at lists.onebuilding.org> wrote:  
 
 Hi all Modelers,
This time I have come across a single floor building which has zones with different height. I have attached a roughly drawn elevation as an example (Which is not needed :/) . Can any1 guide me how to model such case as equest allows you to take same height for single floor.
Thanks,Tejas_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20180730/1f7ebf03/attachment.html>


More information about the Equest-users mailing list