[Equest-users] Zones with different roof height on same floor

[Daric Adair]

John’s suggestion is valid & is straightforward. I believe with zones in adjacent shells they will need to modified from ‘adiabatic’ interior walls to having proper adjacencies for internal heat transfer. But it works.

Another approach would be to place all zones in a single shell at the lower/predominate roof height. Ensure that the zone boarder aligns with the higher roof area. Blue lines in 1st attachment. Then in detailed mode the roof can be raised to the higher/proper height. This will stretch the interior walls up though, so those will need to be set back down to their original height (reduce their ‘HEIGHT’,  so they stay the height of the blue lines). The new exterior walls can be created, assigned to the proper ‘LOCATION’  will put them in the right plan location (second image, highlighting). Then increase the ‘Z’ value to the lower roof height and decrease their ‘Height’ to be just the bump up height. Red lines in 1st attachment.

This will allow a single shell, keep adjacent heat transfer, and allow addition of these bump up walls.


Thanks,
DARIC R ADAIR PE, CEM, BEMP
Mechanical Engineer, Energy Analyst

Henderson Engineers
daric.adair at hendersonengineers.com<mailto:daric.adair at hendersonengineers.com>

Licensed in KS

From: John Aulbach <jra_sac at yahoo.com>
Sent: Monday, July 30, 2018 3:16 PM
To: equest-users at lists.onebuilding.org; equest user <equestuser00 at gmail.com>
Subject: Re: [Equest-users] Zones with different roof height on same floor

A quickie from me. Make each zone a different shell. Then, I believe, you can do your different roof heights. Detail Edit Mode is best. Sorry i do not have time to create an example.

John R. Aulbach, PE

On Monday, July 30, 2018, 3:43:05 AM PDT, equest user via Equest-users <equest-users at lists.onebuilding.org<mailto:equest-users at lists.onebuilding.org>> wrote:


Hi all Modelers,

This time I have come across a single floor building which has zones with different height. I have attached a roughly drawn elevation as an example (Which is not needed :/) . Can any1 guide me how to model such case as equest allows you to take same height for single floor.

Thanks,
Tejas
_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG<mailto:EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG>

________________________________

This email and any files transmitted with it are confidential and are intended solely for the use of the individual or entity to whom they are addressed. This communication represents the originator's personal views and opinions, which do not necessarily reflect those of Henderson Engineers, Inc. If you are not the original recipient or the person responsible for delivering the email to the intended recipient, be advised that you have received this email in error, and that any use, dissemination, forwarding, printing, or copying of this email is strictly prohibited. If you received this email in error, please immediately notify administrator at hendersonengineers.com.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20180730/d6e53011/attachment-0002.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 2018-07-30 15_38_13-2018-07-30 15_29_17-FLOOR HEIGHT.jpg ?- Photos.png ?....png
Type: image/png
Size: 759481 bytes
Desc: 2018-07-30 15_38_13-2018-07-30 15_29_17-FLOOR HEIGHT.jpg ?- Photos.png ?....png
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20180730/d6e53011/attachment-0008.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 2018-07-30 15_41_03-Project 21.pd2_2 - eQUEST Quick Energy Simulation To....png
Type: image/png
Size: 12660 bytes
Desc: 2018-07-30 15_41_03-Project 21.pd2_2 - eQUEST Quick Energy Simulation To....png
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20180730/d6e53011/attachment-0009.png>