[Equest-users] Different values in detailed report and hourly report

Integral Mechanical Engineering Designs integralmech at outlook.com
Mon Dec 3 14:46:23 PST 2018


Thanks for the answer,

I am using for cooling only, thus if the temperature is higher than 75°F (indoor design temperature), the unit should be on.


Kind Regards,

Paul Caicedo

________________________________
From: Brian Fountain <bfountain at greensim.com>
Sent: December 3, 2018 3:27 PM
To: Integral Mechanical Engineering Designs via Equest-users
Subject: Re: [Equest-users] Different values in detailed report and hourly report

The hours in your ss-f do not add up to 8760. It only reports when the system is on. Is it possible the system is off for the hours where the temp is higher?

From: Integral Mechanical Engineering Designs via Equest-users
Sent: Monday, December 3, 2018 5:17 PM
To: equest-users at lists.onebuilding.org
Reply To: Integral Mechanical Engineering Designs
Subject: [Equest-users] Different values in detailed report and hourly report


Hello everybody,

I have hours where the temperature is maximum 80-85 F in the detailed report, but the spreadsheet shows values above 90. Why that incongruence could happen?


[cid:a5106a8a-52d2-400b-abf5-7b5e2d13ec39]


Kind Regards,

Paul Caicedo

Mechanical Engineering Consultant

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20181203/02e6338a/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Outlook-rlrew0ab.png
Type: image/png
Size: 11835 bytes
Desc: Outlook-rlrew0ab.png
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20181203/02e6338a/attachment.png>


More information about the Equest-users mailing list