[Equest-users] 3.65 Build 7173 DOE 2.3 Missing Options

[Bishop, Bill]

Hi Paul,
You can use PSZ (packaged single zone) for PTAC. There is a new system type (called DOAS I think) in DOE-2.3 that you can set up to provide outside air to one or more systems.
I think you could still go the other route and copy your building geometry from the input file and import into a DOE-2.2 model.
Regards,
~Bill



Sent from my Verizon, Samsung Galaxy smartphone


-------- Original message --------
From: Paul Diglio via Equest-users <equest-users at lists.onebuilding.org>
Date: 11/28/17 6:43 AM (GMT-05:00)
To: via Equest-users <equest-users at lists.onebuilding.org>
Subject: [Equest-users] 3.65 Build 7173 DOE 2.3 Missing Options

Ye gads, I just entered a very complex shell and zoning pattern using DOE2.3 and when I entered the detailed mode was very shocked to see it does not support PTAC units or OA-From-System.

Can't seem to revert to DOE 2.2, many, many errors.

Does anyone have a solution?

Thank you,

Paul Diglio
87 Fairmont Avenue
New Haven, CT 06513