[Equest-users] Seeing the Middle Floors

[Lapierre, Patrick via Equest-users]

The 3D view is generated this way because you used floor multipliers.
If you want to see the entire building, you must model every floor (instead of using floor multipliers).


[Bouthillette Parizeau]<http://www.bpa.ca/>

Patrick Lapierre_ing. BEMP
plapierre at bpa.ca | t: 5143833747x2807


De : Equest-users [mailto:equest-users-bounces at lists.onebuilding.org] De la part de Tugçin Kirant via Equest-users
Envoyé : 26 mai 2017 04:03
À : equest-users at lists.onebuilding.org
Objet : [Equest-users] Seeing the Middle Floors


Hello everybody,



I have a little problem.

I am modelling a 6-story building. However, 3D modelling figure of the building doesn't show the all of the middle floors.

[cid:image004.jpg at 01D2D5F2.5F3868E0]



I have modeled it on schematic design. I need to see all  of the floors.

I wonder if i can change the view of the building without modeling it from the beginning?



Thank you!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20170526/fbae65b3/attachment-0002.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image003.jpg
Type: image/jpeg
Size: 1175 bytes
Desc: image003.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20170526/fbae65b3/attachment-0004.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image004.jpg
Type: image/jpeg
Size: 7415 bytes
Desc: image004.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20170526/fbae65b3/attachment-0005.jpg>