[Equest-users] Seeing the Middle Floors

Lapierre, Patrick via Equest-users equest-users at lists.onebuilding.org
Fri May 26 04:33:34 PDT 2017


The 3D view is generated this way because you used floor multipliers.
If you want to see the entire building, you must model every floor (instead of using floor multipliers).


[Bouthillette Parizeau]<http://www.bpa.ca/>

Patrick Lapierre_ing. BEMP
plapierre at bpa.ca | t: 5143833747x2807


De : Equest-users [mailto:equest-users-bounces at lists.onebuilding.org] De la part de Tugçin Kirant via Equest-users
Envoyé : 26 mai 2017 04:03
À : equest-users at lists.onebuilding.org
Objet : [Equest-users] Seeing the Middle Floors


Hello everybody,



I have a little problem.

I am modelling a 6-story building. However, 3D modelling figure of the building doesn't show the all of the middle floors.

[cid:image004.jpg at 01D2D5F2.5F3868E0]



I have modeled it on schematic design. I need to see all  of the floors.

I wonder if i can change the view of the building without modeling it from the beginning?



Thank you!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20170526/fbae65b3/attachment-0005.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image003.jpg
Type: image/jpeg
Size: 1175 bytes
Desc: image003.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20170526/fbae65b3/attachment-0010.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image004.jpg
Type: image/jpeg
Size: 7415 bytes
Desc: image004.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20170526/fbae65b3/attachment-0011.jpg>


More information about the Equest-users mailing list