[Equest-users] Double Facade wall modeling strategies

[PKConsulting via Equest-users]

Thanks Patrick- this is interesting because I was trying to consider how I could use a sunspace for this scenario.

Thanks,  I might give this approach a trial run!

Pasha
Ph: 308-763-1593

> On Jun 27, 2017, at 10:57 AM, Lapierre, Patrick <plapierre at bpa.ca> wrote:
> 
> Hi Pasha,
>  
> I’ve completed one project that used a double facade wall.
> The strategy used was to model a thin zone alongside all the perimeter of the building, something like 2 ft wide. Then I modeled windows in the internal wall between the “facade zone” and the “interior zone” and modeled the “facade zone” as a sunspace.
>  
> Results were making sense but it was a pain to model the reference building since the zoning had to be done anew.
>  
> Hope that helps you.
>  
>  
> <image001.jpg>
> Patrick Lapierre_ing. BEMP
> plapierre at bpa.ca | t: 5143833747x2807
>  
> De : Equest-users [mailto:equest-users-bounces at lists.onebuilding.org] De la part de Pasha Korber-Gonzalez via Equest-users
> Envoyé : 27 juin 2017 11:50
> À : eQUEST Users List <equest-users at lists.onebuilding.org>
> Objet : [Equest-users] Double Facade wall modeling strategies
>  
> Hi all-- does anyone have a successful example or strategy to model a double facade in eQuest?
>  
> At this point I am open to any ideas and tips.  Everything I have tried thus far is not yielding anything useful to the model.
>  
> Thanks,
> Pasha
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20170628/dd51dff2/attachment-0004.htm>