[Equest-users] Proposed Case fan power modelling

[Mayank Bhatnagar via Equest-users]

Hello Everyone,


Ours is a Residential Project with PTAC units and DOAS in the Proposed
design. The DOAS nameplate motor HP is 7.5 where as the fan absorbed power
is 4.73 BHP. If we model 7.5 HP; we are falling short of the minimum LEED
energy performance requirements. Modelling
4.73 BHP just gives us enough savings.

Which one is the correct fan power to model?

I have been through the archives and didn't find appropriate answer. Please
help!

Regards,

Mayank.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20170718/393a279f/attachment-0003.htm>