[Equest-users] Project Building with too many spaces

Anthony via Equest-users equest-users at lists.onebuilding.org
Thu Jan 12 14:28:04 PST 2017


Take a look at Table G3.1.  The sub sections on Thermal Blocks and HVAC
Systems describe how you can combine individual spaces into model zones
which will go a long way towards simplifying your model.  

 

Anthony Hardman, PE, BEAP, LEED AP BD+C

Senior Building Performance Analyst

 <http://www.greenengineer.com/> The Green Engineer, Inc.

Sustainable Design Consulting

54 Junction Square Dr.

Concord, MA 01742

O: (978) 369-8978

D: (978) 610-2801

C: (720) 840-7862

 

The Green Engineer, Inc. is a Certified B Corporation

 

From: Paula A Hernández via Equest-users
[mailto:equest-users at lists.onebuilding.org] 
Sent: Thursday, January 12, 2017 5:57 AM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Project Building with too many spaces

 

Hi everyone,

 

I am working in a very large building, which has many different space usage
types.

 

The HVAC Project consists in a lot of AHUs, constant volume, fan coil units
and active chilled beams. 

 

The issue is that there are almost 1500 spaces distributed in the different
systems. 

 

I am a little disoriented because I started modeling my Project Building
with each one of the AHUs without discriminating each space, but this AHUs
attend different space usage types, for instance, one of them is for the
“Pharmacy”, and it attends circulation, office spaces and storage.

 

According to the number of floors, building area and heating source, my
Baseline HVAC system will be System 7, Variable air volume with reheat. So I
will assign one VAV AHU for each floor. And then, how will I assign each VAV
zone?, do I have to model all the 1500 spaces or will it be enough to model
a VAV box for  each AHU as defined in the Project Building?,

 

I will really appreciate your comments on this,

 

Thank you,

 

Paula

 

Region XII Horizontal-small

Ingeniera Paula Andrea Hernández LEED  AP (BD +C)

Capitulo Argentino de ASHRAE Board Member -  Region XII MP RVC

 

Estudio Ingeniero Mario Pedro Hernández

Tel./Fax: 4302-9561 Tel.: 4303-3481

Av. Montes de Oca 1103 5º D - C.A.B.A.

Web Site:  <http://www.mphingenieria.com.ar/> www.mphingenieria.com.ar

e-mail:  <mailto:mphingenieria at fibertel.com.ar>
paulahernandez4 at fibertel.com.ar

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20170112/0ee8ecff/attachment-0004.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 3723 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20170112/0ee8ecff/attachment-0002.jpg>


More information about the Equest-users mailing list