[Equest-users] Can envelope be rotated in Detailed Data Mode?

[John Aulbach]

Sure , do it Parametrics. Run 1 Azimuth make 90 deg, run 2 180, always making the base run is your reference.

Sent from Yahoo Mail on Android 
 
  On Wed, Dec 20, 2017 at 1:31 PM, Jing Hong via Equest-users<equest-users at lists.onebuilding.org> wrote:   Dear All,
I wonder, can the whole building be rotated 90, 180 and 270 degree in Detailed Data Mode? If I switch back to Wizard Data Mode and change orientation, the parts and pieces edited in Detail would be gone. Is there any way to make rotation easy?
Thank you,
Jing

-- 
PhD Candidate, LEED AP BD+C
School of Architecture and Urban PlanningUniversity of Wisconsin-Milwaukee
_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20171220/5fd042d6/attachment-0005.htm>
-------------- next part --------------
_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG