[Equest-users] Heat reclaim from refrigeration load

[Sharad Kumar via Equest-users]

HI Tim,

Refrigeration load is the load due to the vapor compression refrigeration
system.
The heat reclaim in the refrigeration system is done by the heat recovery
from the compressor.
It can be the input as in the Heat recovery tab in the Refrigeration tab in
the  HVAC system.
The work you can have a use with the Refrigeration compressor
/condenser heat recovery is the DHW heating of the water in the building.
The default assumes that the total heat rejected by the compressor can be
recovered.


*Thanks*,
Sharad.


---------- Forwarded message ----------
From: Tim Burke via Equest-users <equest-users at lists.onebuilding.org>
To: "equest-users at onebuilding.org" <equest-users at onebuilding.org>, "
equest-users at lists.onebuilding.org" <equest-users at lists.onebuilding.org>
Cc:
Bcc:
Date: Fri, 28 Apr 2017 16:33:59 +0000
Subject: [Equest-users] Heat reclaim from refrigeration load

Anyone know how to do heat reclaim?  I don’t want the energy to have a
utility cost, not sure how to do that.  Also which email am I supposed to
use?



Tim Burke



T.E., Inc.

830 North Riverside Drive #200

Renton, WA. 98057

(425) 970-3753 Phone

(425) 970-3756 Fax

WWW.TEI-ENGINEERING.COM <http://www.tei-engineering.com/>

This message contains information that is confidential or privileged. The
information is intended for the use of the individual or entity named
above. If you are not the intended recipient, be aware that any disclosure,
copying, distribution or use of the contents of this information is
prohibited. If you have received this electronic transmission in error,
please notify the sender and delete this message and any attachments
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20170429/f78b391e/attachment-0002.htm>