[Equest-users] unmet heating load hours

[Sharad Kumar via Equest-users]

Hi Tim,

For LEED projects the unmet load hour can go up-to 300 hours for the
Baseline Case and the unmet hours in the proposed case shall not exceed the
unmet hours in the base case by more than 50 hours.

However in order to remove unmet load hour you can tweak with the heating
set-points to higher limits, changing the control zone to more larger
spaces, might be increasing the throttling range to 8 degree Fahrenheit and
so on.
May be this can help.

*Thanks,*
Sharad.Kumar.


---------- Forwarded message ----------
From: Tim Burke via Equest-users <equest-users at lists.onebuilding.org>
To: "equest-users at onebuilding.org" <equest-users at onebuilding.org>
Cc:
Bcc:
Date: Thu, 27 Apr 2017 21:50:15 +0000
Subject: [Equest-users] unmet heating load hours

I have a Costco warehouse equest model with 4 unmet heating load hours in
my proposed model with zero in my baseline budget model.  I need to be able
to tweak my model to get rid of these unmet load hours but minor tweaks
don’t seem to make a difference.  Could there be something wrong with the
model that results in having a few unmet load hours that are hard to get
rid of?



Tim Burke



T.E., Inc.

830 North Riverside Drive #200

Renton, WA. 98057

(425) 970-3753 Phone

(425) 970-3756 Fax

WWW.TEI-ENGINEERING.COM <http://www.tei-engineering.com/>

This message contains information that is confidential or privileged. The
information is intended for the use of the individual or entity named
above. If you are not the intended recipient, be aware that any disclosure,
copying, distribution or use of the contents of this information is
prohibited. If you have received this electronic transmission in error,
please notify the sender and delete this message and any attachments
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20170429/77f73a0e/attachment-0005.htm>