[Equest-users] Outside wall to outside wall

[John Aulbach via Equest-users]

Thank you all. I just had to shake the trees to jog my DOE-2.1 memory.
A fully shaded outdoor wall is probably the best way, so thank you all.
John 

    On Thursday, September 1, 2016 1:17 PM, Nathan Miller <nathanm at rushingco.com> wrote:
 

 #yiv7061350929 #yiv7061350929 -- _filtered #yiv7061350929 {panose-1:2 4 5 3 5 4 6 3 2 4;} _filtered #yiv7061350929 {font-family:Calibri;panose-1:2 15 5 2 2 2 4 3 2 4;} _filtered #yiv7061350929 {font-family:Verdana;panose-1:2 11 6 4 3 5 4 4 2 4;}#yiv7061350929 #yiv7061350929 p.yiv7061350929MsoNormal, #yiv7061350929 li.yiv7061350929MsoNormal, #yiv7061350929 div.yiv7061350929MsoNormal {margin:0in;margin-bottom:.0001pt;font-size:12.0pt;}#yiv7061350929 a:link, #yiv7061350929 span.yiv7061350929MsoHyperlink {color:#0563C1;text-decoration:underline;}#yiv7061350929 a:visited, #yiv7061350929 span.yiv7061350929MsoHyperlinkFollowed {color:#954F72;text-decoration:underline;}#yiv7061350929 span.yiv7061350929EmailStyle17 {color:#1F497D;}#yiv7061350929 .yiv7061350929MsoChpDefault {font-size:10.0pt;} _filtered #yiv7061350929 {margin:1.0in 1.0in 1.0in 1.0in;}#yiv7061350929 div.yiv7061350929WordSection1 {}#yiv7061350929 Tough call, but I’d probably be conservative and err on the side of making assumptions that result in MORE energy consumption in my modeling (unless there is some benchmarking you can compare to).     That means I’d probably assume the walls are exterior and fully shaded. There is a pretty good chance there is at least small dead-air-space between the buildings (even if it is only a few inches), plus you have no control over what is happening on the other side of the wall… maybe the neighboring building is minimally conditioned, or becomes abandoned.       Nathan Miller, PE, LEED AP BD+C –Mechanical Engineer/Senior Energy Analyst RUSHING|D206-788-4577 |O206-285-7100 |C207-650-3942 www.rushingco.com    From: Equest-users [mailto:equest-users-bounces at lists.onebuilding.org]On Behalf Of John Aulbach via Equest-users
Sent: Wednesday, August 31, 2016 5:42 PM
To: via Equest-users <equest-users at lists.onebuilding.org>
Subject: [Equest-users] Outside wall to outside wall    Hi Gang:    Food (and query) for thought.    I am doing a remodel of a New York Building that is essentially a tenement (?). Building squished between other buildings. Side walls essentially lay against next building.    Inside wall? Outside wall with no solar?    How would you model this?    John R. Aulbach, PE 

   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20160901/b2148901/attachment-0002.htm>