[Equest-users] Baseline Water side design

Saurabh Kumar Srivastava via Equest-users equest-users at lists.onebuilding.org
Wed Sep 28 05:06:43 PDT 2016

Hi Guys!

-After simulating the Proposed model, where can I find (in the SIM file) the Peak cooling load of the Building as it has 4 chillers that work in sequence as per load requirement.
There is Chiller 1,2,3,4 Peak loads and Chilled water loop Peak load, which one do I use? Do we use anything other than this as Building peak load?

Would it be right to use the Peak Cooling load from the Proposed model without reducing its unmet hours to 300 ?

-Would you know the steps for modelling
  Baseline condenser water pump power to 19W/gpm.
I've set the Pump power as default and and gpm as default. But unable to figure out what to do next, i.e how to look into the SIM file for results that would help me know the W/gpm is  now 19.

Best Regards

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20160928/ae4758cc/attachment.htm>

More information about the Equest-users mailing list